Line Coverage for Module : 
prim_mubi8_sender
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Module : 
prim_mubi8_sender
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Module : 
prim_mubi8_sender
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
2147483647 | 
2147483647 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
2147483647 | 
2147483647 | 
0 | 
0 | 
| T1 | 
265392 | 
261231 | 
0 | 
0 | 
| T2 | 
578037 | 
568005 | 
0 | 
0 | 
| T3 | 
883728 | 
872328 | 
0 | 
0 | 
| T4 | 
694773 | 
676362 | 
0 | 
0 | 
| T5 | 
1007475 | 
982509 | 
0 | 
0 | 
| T6 | 
1198767 | 
1182579 | 
0 | 
0 | 
| T10 | 
410799 | 
407664 | 
0 | 
0 | 
| T11 | 
2170332 | 
2166684 | 
0 | 
0 | 
| T12 | 
2591391 | 
2543967 | 
0 | 
0 | 
| T13 | 
744876 | 
720081 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[0].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[0].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[0].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[1].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[1].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[1].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[2].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[2].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[2].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[3].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[3].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[3].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[4].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[4].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[4].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[5].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[5].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[5].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[5].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[5].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[5].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[6].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[6].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[6].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[6].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[6].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[6].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[7].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[7].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[7].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[7].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[7].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[7].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[8].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[8].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[8].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[8].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[8].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[8].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[10].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[10].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[10].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[10].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_bufs[10].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[10].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[10].gen_lifecycle.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_partitions[10].gen_lifecycle.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[10].gen_lifecycle.u_part_buf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[10].gen_lifecycle.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 3 | 50.00 | 
| CONT_ASSIGN | 34 | 1 | 0 | 0.00 | 
| CONT_ASSIGN | 48 | 1 | 0 | 0.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 0 | 0.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         0/1     ==>    assign mubi = MuBi8Width'(mubi_i);
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         0/1     ==>      assign mubi_int = mubi;
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         0/1     ==>    assign mubi_o = mubi8_t'(mubi_out);
Branch Coverage for Instance : tb.dut.gen_partitions[10].gen_lifecycle.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[10].gen_lifecycle.u_part_buf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[0].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T12 T17 T101 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T12 T17 T101 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T12 T17 T101 
Branch Coverage for Instance : tb.dut.gen_bufs[0].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[0].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[1].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T12 T13 T17 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T12 T13 T17 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T12 T13 T17 
Branch Coverage for Instance : tb.dut.gen_bufs[1].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[1].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[2].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T4 T12 T13 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T4 T12 T13 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T4 T12 T13 
Branch Coverage for Instance : tb.dut.gen_bufs[2].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[2].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[3].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T12 T17 T98 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T12 T17 T98 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T12 T17 T98 
Branch Coverage for Instance : tb.dut.gen_bufs[3].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[3].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[4].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T12 T13 T17 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T12 T13 T17 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T12 T13 T17 
Branch Coverage for Instance : tb.dut.gen_bufs[4].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[4].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[9].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_bufs[9].u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[9].u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_bufs[9].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_bufs[9].u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_bufs[9].u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[0].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[1].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[2].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[3].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[4].gen_unbuffered.u_part_unbuf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[5].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[6].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[7].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[8].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.u_prim_mubi8_sender_write_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.u_prim_mubi8_sender_read_lock_pre
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.gen_digest_write_lock.u_prim_mubi8_sender_write_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 | 
 
Line Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| TOTAL |  | 6 | 6 | 100.00 | 
| CONT_ASSIGN | 34 | 1 | 1 | 100.00 | 
| CONT_ASSIGN | 48 | 1 | 1 | 100.00 | 
| ALWAYS | 55 | 3 | 3 | 100.00 | 
| CONT_ASSIGN | 85 | 1 | 1 | 100.00 | 
33                        logic [MuBi8Width-1:0] mubi, mubi_int, mubi_out;
34         1/1            assign mubi = MuBi8Width'(mubi_i);
           Tests:       T1 T2 T3 
35                      
36                        // first generation block decides whether a flop should be present
37                        if (AsyncOn) begin : gen_flops
38                          prim_flop #(
39                            .Width(MuBi8Width),
40                            .ResetValue(MuBi8Width'(ResetValue))
41                          ) u_prim_flop (
42                            .clk_i,
43                            .rst_ni,
44                            .d_i   ( mubi     ),
45                            .q_o   ( mubi_int )
46                          );
47                        end else begin : gen_no_flops
48         1/1              assign mubi_int = mubi;
           Tests:       T1 T2 T3 
49                      
50                          // This unused companion logic helps remove lint errors
51                          // for modules where clock and reset are used for assertions only
52                          // This logic will be removed for sythesis since it is unloaded.
53                          mubi8_t unused_logic;
54                          always_ff @(posedge clk_i or negedge rst_ni) begin
55         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
56         1/1                   unused_logic <= MuBi8False;
           Tests:       T1 T2 T3 
57                            end else begin
58         1/1                   unused_logic <= mubi_i;
           Tests:       T1 T2 T3 
59                            end
60                          end
61                        end
62                      
63                        // second generation block determines output buffer type
64                        // 1. If EnSecBuf -> always leads to a sec buffer regardless of first block
65                        // 2. If not EnSecBuf and not AsyncOn -> use normal buffer
66                        // 3. If not EnSecBuf and AsyncOn -> feed through
67                        if (EnSecBuf) begin : gen_sec_buf
68                          prim_sec_anchor_buf #(
69                            .Width(8)
70                          ) u_prim_sec_buf (
71                            .in_i(mubi_int),
72                            .out_o(mubi_out)
73                          );
74                        end else if (!AsyncOn) begin : gen_prim_buf
75                          prim_buf #(
76                            .Width(8)
77                          ) u_prim_buf (
78                            .in_i(mubi_int),
79                            .out_o(mubi_out)
80                          );
81                        end else begin : gen_feedthru
82                          assign mubi_out = mubi_int;
83                        end
84                      
85         1/1            assign mubi_o = mubi8_t'(mubi_out);
           Tests:       T1 T2 T3 
Branch Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
 | Line No. | Total | Covered | Percent | 
| Branches | 
 | 
2 | 
2 | 
100.00 | 
| IF | 
55 | 
2 | 
2 | 
100.00 | 
55               if (!rst_ni) begin
                 -1-  
56                  unused_logic <= MuBi8False;
                    ==>
57               end else begin
58                  unused_logic <= mubi_i;
                    ==>
Branches:
| -1- | Status | Tests | 
| 1 | 
Covered | 
T1,T2,T3 | 
| 0 | 
Covered | 
T1,T2,T3 | 
Assert Coverage for Instance : tb.dut.gen_partitions[9].gen_buffered.u_part_buf.gen_digest_read_lock.u_prim_mubi8_sender_read_lock
Assertion Details
| Name | Attempts | Real Successes | Failures | Incomplete | 
| 
OutputsKnown_A | 
88289748 | 
87463934 | 
0 | 
0 | 
OutputsKnown_A
| Name | Attempts | Real Successes | Failures | Incomplete | 
| Total | 
88289748 | 
87463934 | 
0 | 
0 | 
| T1 | 
4656 | 
4583 | 
0 | 
0 | 
| T2 | 
10141 | 
9965 | 
0 | 
0 | 
| T3 | 
15504 | 
15304 | 
0 | 
0 | 
| T4 | 
12189 | 
11866 | 
0 | 
0 | 
| T5 | 
17675 | 
17237 | 
0 | 
0 | 
| T6 | 
21031 | 
20747 | 
0 | 
0 | 
| T10 | 
7207 | 
7152 | 
0 | 
0 | 
| T11 | 
38076 | 
38012 | 
0 | 
0 | 
| T12 | 
45463 | 
44631 | 
0 | 
0 | 
| T13 | 
13068 | 
12633 | 
0 | 
0 |