Module Definition
dashboard | hierarchy | modlist | groups | tests | asserts

Module : prim_intr_hw
SCORELINECONDTOGGLEFSMBRANCHASSERT
100.00 100.00 100.00 100.00 100.00

Source File(s) :
/workspaces/repo/scratch/os_regression_2024_09_08/otp_ctrl-sim-vcs/default/sim-vcs/../src/lowrisc_prim_all_0.1/rtl/prim_intr_hw.sv

Module self-instances :
NAMESCORELINECONDTOGGLEFSMBRANCHASSERT
tb.dut.u_intr_operation_done 100.00 100.00 100.00 100.00 100.00
tb.dut.u_intr_error 100.00 100.00 100.00 100.00 100.00


Module Instance : tb.dut.u_intr_operation_done

Instance :
SCORELINECONDTOGGLEFSMBRANCHASSERT
100.00 100.00 100.00 100.00 100.00


Instance's subtree :
SCORELINECONDTOGGLEFSMBRANCHASSERT
100.00 100.00 100.00 100.00 100.00


Parent :
SCORELINECONDTOGGLEFSMBRANCHASSERTNAME
96.00 94.16 95.24 97.00 96.43 97.18 dut


Subtrees :
NAMESCORELINECONDTOGGLEFSMBRANCHASSERT
no children


Module Instance : tb.dut.u_intr_error

Instance :
SCORELINECONDTOGGLEFSMBRANCHASSERT
100.00 100.00 100.00 100.00 100.00


Instance's subtree :
SCORELINECONDTOGGLEFSMBRANCHASSERT
100.00 100.00 100.00 100.00 100.00


Parent :
SCORELINECONDTOGGLEFSMBRANCHASSERTNAME
96.00 94.16 95.24 97.00 96.43 97.18 dut


Subtrees :
NAMESCORELINECONDTOGGLEFSMBRANCHASSERT
no children

Line Coverage for Module : prim_intr_hw
Line No.TotalCoveredPercent
TOTAL77100.00
CONT_ASSIGN6211100.00
CONT_ASSIGN6411100.00
CONT_ASSIGN6711100.00
CONT_ASSIGN6911100.00
ALWAYS9533100.00


61                          logic  [Width-1:0]    new_event;
62         1/1              assign new_event =
           Tests:       T1 T2 T3 
63                                     (({Width{reg2hw_intr_test_qe_i}} & reg2hw_intr_test_q_i) | event_intr_i);
64         1/1              assign hw2reg_intr_state_de_o = |new_event;
           Tests:       T1 T2 T3 
65                          // for scalar interrupts, this resolves to '1' with new event
66                          // for vector interrupts, new events are OR'd in to existing interrupt state
67         1/1              assign hw2reg_intr_state_d_o  =  new_event | reg2hw_intr_state_q_i;
           Tests:       T1 T2 T3 
68                      
69         1/1              assign status = reg2hw_intr_state_q_i ;
           Tests:       T1 T2 T3 
70                        end : g_intr_event
71                        else if (IntrT == "Status") begin : g_intr_status
72                          logic [Width-1:0] test_q; // Storing test. Cleared by SW
73                      
74                          always_ff @(posedge clk_i or negedge rst_ni) begin
75                            if (!rst_ni) test_q <= '0;
76                            else if (reg2hw_intr_test_qe_i) test_q <= reg2hw_intr_test_q_i;
77                          end
78                      
79                          // TODO: In Status type, INTR_STATE is better to be external type and RO.
80                          assign hw2reg_intr_state_de_o = 1'b 1; // always represent the status
81                          assign hw2reg_intr_state_d_o  = event_intr_i | test_q;
82                      
83                          assign status = event_intr_i | test_q;
84                      
85                          // To make the timing same to event type, status signal does not use CSR.q,
86                          // rather the input of the CSR.
87                          logic unused_reg2hw;
88                          assign unused_reg2hw = ^reg2hw_intr_state_q_i;
89                        end : g_intr_status
90                      
91                      
92                        if (FlopOutput == 1) begin : gen_flop_intr_output
93                          // flop the interrupt output
94                          always_ff @(posedge clk_i or negedge rst_ni) begin
95         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
96         1/1                  intr_o <= '0;
           Tests:       T1 T2 T3 
97                            end else begin
98         1/1                  intr_o <= status & reg2hw_intr_enable_q_i;
           Tests:       T1 T2 T3 
Cond Coverage for Module : prim_intr_hw
TotalCoveredPercent
Conditions1212100.00
Logical1212100.00
Non-Logical00
Event00

 LINE       62
 EXPRESSION ((({Width {reg2hw_intr_test_qe_i}}) & reg2hw_intr_test_q_i) | event_intr_i)
             -----------------------------1----------------------------   ------2-----
-1--2-StatusTests
00CoveredT1,T2,T3
01CoveredT1,T2,T3
10CoveredT15,T305,T16 

 LINE       62
 SUB-EXPRESSION (({Width {reg2hw_intr_test_qe_i}}) & reg2hw_intr_test_q_i)
                 ----------------1----------------   ----------2---------
-1--2-StatusTests
01CoveredT1,T2,T3
10CoveredT15,T305,T16
11CoveredT15,T305,T16 

 LINE       67
 EXPRESSION (g_intr_event.new_event | reg2hw_intr_state_q_i)
             -----------1----------   ----------2----------
-1--2-StatusTests
00CoveredT1,T2,T3
01CoveredT1,T2,T3
10CoveredT1,T2,T3 

 LINE       98
 EXPRESSION (status & reg2hw_intr_enable_q_i)
             ---1--   -----------2----------
-1--2-StatusTests
01CoveredT1,T2,T3
10CoveredT2,T3,T6
11CoveredT1,T3,T6
Branch Coverage for Module : prim_intr_hw
Line No.TotalCoveredPercent
Branches 2 2 100.00
IF 95 2 2 100.00 



95               if (!rst_ni) begin
                 -1-  
96                 intr_o <= '0;
                   ==>
97               end else begin
98                 intr_o <= status & reg2hw_intr_enable_q_i;
                   ==>

Branches:
-1-StatusTests
1 Covered T1,T2,T3
0 Covered T1,T2,T3

Assert Coverage for Module : prim_intr_hw
TotalAttemptedPercentSucceeded/MatchedPercent
Assertions 1 1 100.00 1 100.00
Cover properties 0 0 0
Cover sequences 0 0 0
Total 1 1 100.00 1 100.00



Assertion Details

NameAttemptsReal SuccessesFailuresIncomplete
IntrTKind_A 2246 2246 0 0


IntrTKind_A
NameAttemptsReal SuccessesFailuresIncomplete
Total 2246 2246 0 0
T1 2 2 0 0
T2 2 2 0 0
T3 2 2 0 0
T4 2 2 0 0
T6 2 2 0 0
T10 2 2 0 0
T11 2 2 0 0
T12 2 2 0 0
T13 2 2 0 0
T14 2 2 0 0

Line Coverage for Instance : tb.dut.u_intr_operation_done
Line No.TotalCoveredPercent
TOTAL77100.00
CONT_ASSIGN6211100.00
CONT_ASSIGN6411100.00
CONT_ASSIGN6711100.00
CONT_ASSIGN6911100.00
ALWAYS9533100.00


61                          logic  [Width-1:0]    new_event;
62         1/1              assign new_event =
           Tests:       T1 T2 T3 
63                                     (({Width{reg2hw_intr_test_qe_i}} & reg2hw_intr_test_q_i) | event_intr_i);
64         1/1              assign hw2reg_intr_state_de_o = |new_event;
           Tests:       T1 T2 T3 
65                          // for scalar interrupts, this resolves to '1' with new event
66                          // for vector interrupts, new events are OR'd in to existing interrupt state
67         1/1              assign hw2reg_intr_state_d_o  =  new_event | reg2hw_intr_state_q_i;
           Tests:       T1 T2 T3 
68                      
69         1/1              assign status = reg2hw_intr_state_q_i ;
           Tests:       T1 T2 T3 
70                        end : g_intr_event
71                        else if (IntrT == "Status") begin : g_intr_status
72                          logic [Width-1:0] test_q; // Storing test. Cleared by SW
73                      
74                          always_ff @(posedge clk_i or negedge rst_ni) begin
75                            if (!rst_ni) test_q <= '0;
76                            else if (reg2hw_intr_test_qe_i) test_q <= reg2hw_intr_test_q_i;
77                          end
78                      
79                          // TODO: In Status type, INTR_STATE is better to be external type and RO.
80                          assign hw2reg_intr_state_de_o = 1'b 1; // always represent the status
81                          assign hw2reg_intr_state_d_o  = event_intr_i | test_q;
82                      
83                          assign status = event_intr_i | test_q;
84                      
85                          // To make the timing same to event type, status signal does not use CSR.q,
86                          // rather the input of the CSR.
87                          logic unused_reg2hw;
88                          assign unused_reg2hw = ^reg2hw_intr_state_q_i;
89                        end : g_intr_status
90                      
91                      
92                        if (FlopOutput == 1) begin : gen_flop_intr_output
93                          // flop the interrupt output
94                          always_ff @(posedge clk_i or negedge rst_ni) begin
95         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
96         1/1                  intr_o <= '0;
           Tests:       T1 T2 T3 
97                            end else begin
98         1/1                  intr_o <= status & reg2hw_intr_enable_q_i;
           Tests:       T1 T2 T3 
Cond Coverage for Instance : tb.dut.u_intr_operation_done
TotalCoveredPercent
Conditions1212100.00
Logical1212100.00
Non-Logical00
Event00

 LINE       62
 EXPRESSION ((({Width {reg2hw_intr_test_qe_i}}) & reg2hw_intr_test_q_i) | event_intr_i)
             -----------------------------1----------------------------   ------2-----
-1--2-StatusTests
00CoveredT1,T2,T3
01CoveredT1,T2,T3
10CoveredT15,T16,T150 

 LINE       62
 SUB-EXPRESSION (({Width {reg2hw_intr_test_qe_i}}) & reg2hw_intr_test_q_i)
                 ----------------1----------------   ----------2---------
-1--2-StatusTests
01CoveredT1,T2,T3
10CoveredT15,T305,T16
11CoveredT15,T16,T150 

 LINE       67
 EXPRESSION (g_intr_event.new_event | reg2hw_intr_state_q_i)
             -----------1----------   ----------2----------
-1--2-StatusTests
00CoveredT1,T2,T3
01CoveredT1,T2,T3
10CoveredT1,T2,T3 

 LINE       98
 EXPRESSION (status & reg2hw_intr_enable_q_i)
             ---1--   -----------2----------
-1--2-StatusTests
01CoveredT1,T2,T6
10CoveredT2,T3,T6
11CoveredT1,T11,T14
Branch Coverage for Instance : tb.dut.u_intr_operation_done
Line No.TotalCoveredPercent
Branches 2 2 100.00
IF 95 2 2 100.00 



95               if (!rst_ni) begin
                 -1-  
96                 intr_o <= '0;
                   ==>
97               end else begin
98                 intr_o <= status & reg2hw_intr_enable_q_i;
                   ==>

Branches:
-1-StatusTests
1 Covered T1,T2,T3
0 Covered T1,T2,T3

Assert Coverage for Instance : tb.dut.u_intr_operation_done
TotalAttemptedPercentSucceeded/MatchedPercent
Assertions 1 1 100.00 1 100.00
Cover properties 0 0 0
Cover sequences 0 0 0
Total 1 1 100.00 1 100.00



Assertion Details

NameAttemptsReal SuccessesFailuresIncomplete
IntrTKind_A 1123 1123 0 0


IntrTKind_A
NameAttemptsReal SuccessesFailuresIncomplete
Total 1123 1123 0 0
T1 1 1 0 0
T2 1 1 0 0
T3 1 1 0 0
T4 1 1 0 0
T6 1 1 0 0
T10 1 1 0 0
T11 1 1 0 0
T12 1 1 0 0
T13 1 1 0 0
T14 1 1 0 0

Line Coverage for Instance : tb.dut.u_intr_error
Line No.TotalCoveredPercent
TOTAL77100.00
CONT_ASSIGN6211100.00
CONT_ASSIGN6411100.00
CONT_ASSIGN6711100.00
CONT_ASSIGN6911100.00
ALWAYS9533100.00


61                          logic  [Width-1:0]    new_event;
62         1/1              assign new_event =
           Tests:       T1 T2 T3 
63                                     (({Width{reg2hw_intr_test_qe_i}} & reg2hw_intr_test_q_i) | event_intr_i);
64         1/1              assign hw2reg_intr_state_de_o = |new_event;
           Tests:       T1 T2 T3 
65                          // for scalar interrupts, this resolves to '1' with new event
66                          // for vector interrupts, new events are OR'd in to existing interrupt state
67         1/1              assign hw2reg_intr_state_d_o  =  new_event | reg2hw_intr_state_q_i;
           Tests:       T1 T2 T3 
68                      
69         1/1              assign status = reg2hw_intr_state_q_i ;
           Tests:       T1 T2 T3 
70                        end : g_intr_event
71                        else if (IntrT == "Status") begin : g_intr_status
72                          logic [Width-1:0] test_q; // Storing test. Cleared by SW
73                      
74                          always_ff @(posedge clk_i or negedge rst_ni) begin
75                            if (!rst_ni) test_q <= '0;
76                            else if (reg2hw_intr_test_qe_i) test_q <= reg2hw_intr_test_q_i;
77                          end
78                      
79                          // TODO: In Status type, INTR_STATE is better to be external type and RO.
80                          assign hw2reg_intr_state_de_o = 1'b 1; // always represent the status
81                          assign hw2reg_intr_state_d_o  = event_intr_i | test_q;
82                      
83                          assign status = event_intr_i | test_q;
84                      
85                          // To make the timing same to event type, status signal does not use CSR.q,
86                          // rather the input of the CSR.
87                          logic unused_reg2hw;
88                          assign unused_reg2hw = ^reg2hw_intr_state_q_i;
89                        end : g_intr_status
90                      
91                      
92                        if (FlopOutput == 1) begin : gen_flop_intr_output
93                          // flop the interrupt output
94                          always_ff @(posedge clk_i or negedge rst_ni) begin
95         1/1                if (!rst_ni) begin
           Tests:       T1 T2 T3 
96         1/1                  intr_o <= '0;
           Tests:       T1 T2 T3 
97                            end else begin
98         1/1                  intr_o <= status & reg2hw_intr_enable_q_i;
           Tests:       T1 T2 T3 
Cond Coverage for Instance : tb.dut.u_intr_error
TotalCoveredPercent
Conditions1212100.00
Logical1212100.00
Non-Logical00
Event00

 LINE       62
 EXPRESSION ((({Width {reg2hw_intr_test_qe_i}}) & reg2hw_intr_test_q_i) | event_intr_i)
             -----------------------------1----------------------------   ------2-----
-1--2-StatusTests
00CoveredT1,T2,T3
01CoveredT1,T3,T6
10CoveredT15,T305,T16 

 LINE       62
 SUB-EXPRESSION (({Width {reg2hw_intr_test_qe_i}}) & reg2hw_intr_test_q_i)
                 ----------------1----------------   ----------2---------
-1--2-StatusTests
01CoveredT1,T2,T3
10CoveredT15,T305,T16
11CoveredT15,T305,T16 

 LINE       67
 EXPRESSION (g_intr_event.new_event | reg2hw_intr_state_q_i)
             -----------1----------   ----------2----------
-1--2-StatusTests
00CoveredT1,T2,T3
01CoveredT1,T3,T6
10CoveredT1,T3,T6 

 LINE       98
 EXPRESSION (status & reg2hw_intr_enable_q_i)
             ---1--   -----------2----------
-1--2-StatusTests
01CoveredT1,T2,T3
10CoveredT6,T4,T11
11CoveredT1,T3,T6
Branch Coverage for Instance : tb.dut.u_intr_error
Line No.TotalCoveredPercent
Branches 2 2 100.00
IF 95 2 2 100.00 



95               if (!rst_ni) begin
                 -1-  
96                 intr_o <= '0;
                   ==>
97               end else begin
98                 intr_o <= status & reg2hw_intr_enable_q_i;
                   ==>

Branches:
-1-StatusTests
1 Covered T1,T2,T3
0 Covered T1,T2,T3

Assert Coverage for Instance : tb.dut.u_intr_error
TotalAttemptedPercentSucceeded/MatchedPercent
Assertions 1 1 100.00 1 100.00
Cover properties 0 0 0
Cover sequences 0 0 0
Total 1 1 100.00 1 100.00



Assertion Details

NameAttemptsReal SuccessesFailuresIncomplete
IntrTKind_A 1123 1123 0 0


IntrTKind_A
NameAttemptsReal SuccessesFailuresIncomplete
Total 1123 1123 0 0
T1 1 1 0 0
T2 1 1 0 0
T3 1 1 0 0
T4 1 1 0 0
T6 1 1 0 0
T10 1 1 0 0
T11 1 1 0 0
T12 1 1 0 0
T13 1 1 0 0
T14 1 1 0 0

0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%