Unified Coverage Report :: Module Instance :: tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_2_cdc

Module Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_2_cdc

Instance :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
97.73	100.00	90.91			100.00	100.00

Instance's subtree :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
99.17	100.00	96.67			100.00	100.00

Parent :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT	NAME
99.25	99.77	97.22			100.00	100.00	u_reg

Subtrees :

NAME	SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
u_arb	100.00	100.00	100.00			100.00	100.00
u_src_to_dst_req	100.00	100.00	100.00			100.00	100.00

Module Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_3_cdc

Instance :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
97.73	100.00	90.91			100.00	100.00

Instance's subtree :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
99.17	100.00	96.67			100.00	100.00

Parent :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT	NAME
99.25	99.77	97.22			100.00	100.00	u_reg

Subtrees :

NAME	SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
u_arb	100.00	100.00	100.00			100.00	100.00
u_src_to_dst_req	100.00	100.00	100.00			100.00	100.00

Module Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_4_cdc

Instance :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
97.73	100.00	90.91			100.00	100.00

Instance's subtree :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
99.17	100.00	96.67			100.00	100.00

Parent :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT	NAME
99.25	99.77	97.22			100.00	100.00	u_reg

Subtrees :

NAME	SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
u_arb	100.00	100.00	100.00			100.00	100.00
u_src_to_dst_req	100.00	100.00	100.00			100.00	100.00

Module Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_5_cdc

Instance :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
97.73	100.00	90.91			100.00	100.00

Instance's subtree :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
99.17	100.00	96.67			100.00	100.00

Parent :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT	NAME
99.25	99.77	97.22			100.00	100.00	u_reg

Subtrees :

NAME	SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
u_arb	100.00	100.00	100.00			100.00	100.00
u_src_to_dst_req	100.00	100.00	100.00			100.00	100.00

Module Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_6_cdc

Instance :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
97.73	100.00	90.91			100.00	100.00

Instance's subtree :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
99.17	100.00	96.67			100.00	100.00

Parent :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT	NAME
99.25	99.77	97.22			100.00	100.00	u_reg

Subtrees :

NAME	SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
u_arb	100.00	100.00	100.00			100.00	100.00
u_src_to_dst_req	100.00	100.00	100.00			100.00	100.00

Module Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_7_cdc

Instance :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
97.73	100.00	90.91			100.00	100.00

Instance's subtree :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
99.17	100.00	96.67			100.00	100.00

Parent :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT	NAME
99.25	99.77	97.22			100.00	100.00	u_reg

Subtrees :

NAME	SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
u_arb	100.00	100.00	100.00			100.00	100.00
u_src_to_dst_req	100.00	100.00	100.00			100.00	100.00

Module Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_cause_cdc

Instance :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
96.43	100.00	85.71			100.00	100.00

Instance's subtree :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
93.68	96.99	84.51			93.22	100.00

Parent :

SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT	NAME
99.25	99.77	97.22			100.00	100.00	u_reg

Subtrees :

NAME	SCORE	LINE	COND	TOGGLE	FSM	BRANCH	ASSERT
u_arb	92.06	95.92	81.63			90.70	100.00
u_src_to_dst_req	100.00	100.00	100.00			100.00	100.00

Line Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_2_cdc

	Line No.	Total	Covered	Percent
TOTAL		22	22	100.00
CONT_ASSIGN	65	1	1	100.00
ALWAYS	71	6	6	100.00
CONT_ASSIGN	85	1	1	100.00
CONT_ASSIGN	109	1	1	100.00
ALWAYS	115	9	9	100.00
CONT_ASSIGN	150	1	1	100.00
CONT_ASSIGN	155	1	1	100.00
CONT_ASSIGN	156	1	1	100.00
CONT_ASSIGN	200	1	1	100.00

64                      
65         1/1            assign src_req = src_we_i | src_re_i;
           Tests:       T74 T97 T98 
66                      
67                        // busy indication back-pressures upstream if the register is accessed
68                        // again.  The busy indication is also used as a "commit" indication for
69                        // resolving software and hardware write conflicts
70                        always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
71         1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
72         1/1                src_busy_q <= '0;
           Tests:       T1 T2 T3 
73         1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
74         1/1                src_busy_q <= 1'b1;
           Tests:       T74 T407 T158 
75         1/1              end else if (src_ack) begin
           Tests:       T1 T2 T3 
76         1/1                src_busy_q <= 1'b0;
           Tests:       T74 T407 T158 
77                          end
                        MISSING_ELSE
78                        end
79                      
80                        // A src_ack should only be sent if there was a src_req.
81                        // src_busy_q asserts whenever there is a src_req.  By association,
82                        // whenever src_ack is seen, then src_busy must be high.
83                        `ASSERT(SrcAckBusyChk_A, src_ack |-> src_busy_q, clk_src_i, !rst_src_ni)
84                      
85         1/1            assign src_busy_o = src_busy_q;
           Tests:       T74 T407 T158 
86                      
87                        // src_q acts as both the write holding register and the software read back
88                        // register.
89                        // When software performs a write, the write data is captured in src_q for
90                        // CDC purposes.  When not performing a write, the src_q reflects the most recent
91                        // hardware value. For registers with no hardware access, this is simply the
92                        // the value programmed by software (or in the case R1C, W1C etc) the value after
93                        // the operation. For registers with hardware access, this reflects a potentially
94                        // delayed version of the real value, as the software facing updates lag real
95                        // time updates.
96                        //
97                        // To resolve software and hardware conflicts, the process is as follows:
98                        // When software issues a write, this module asserts "busy".  While busy,
99                        // src_q does not take on destination value updates.  Since the
100                       // logic has committed to updating based on software command, there is an irreversible
101                       // window from which hardware writes are ignored.  Once the busy window completes,
102                       // the cdc portion then begins sampling once more.
103                       //
104                       // This is consistent with prim_subreg_arb where during software / hardware conflicts,
105                       // software is always prioritized.  The main difference is the conflict resolution window
106                       // is now larger instead of just one destination clock cycle.
107                     
108                       logic busy;
109        1/1            assign busy = src_busy_q & !src_ack;
           Tests:       T74 T407 T158 
110                     
111                       // This is the current destination value
112                       logic [DataWidth-1:0] dst_qs;
113                       logic src_update;
114                       always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
115        1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
116        1/1                src_q <= ResetVal;
           Tests:       T1 T2 T3 
117        1/1                txn_bits_q <= '0;
           Tests:       T1 T2 T3 
118        1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
119                           // See assertion below
120                           // At the beginning of a software initiated transaction, the following
121                           // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122                           // change for the duration of the synchronization operation.
123        1/1                src_q <= src_wd_i & BitMask;
           Tests:       T74 T407 T158 
124        1/1                txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
           Tests:       T74 T407 T158 
125        1/1              end else if (src_busy_q && src_ack || src_update && !busy) begin
           Tests:       T1 T2 T3 
126                           // sample data whenever a busy transaction finishes OR
127                           // when an update pulse is seen.
128                           // TODO: We should add a cover group to test different sync timings
129                           // between src_ack and src_update. ie. there can be 3 scenarios:
130                           // 1. update one cycle before ack
131                           // 2. ack one cycle before update
132                           // 3. update / ack on the same cycle
133                           // During all 3 cases the read data should be correct
134        1/1                src_q <= dst_qs;
           Tests:       T74 T407 T158 
135        1/1                txn_bits_q <= '0;
           Tests:       T74 T407 T158 
136                         end
                        MISSING_ELSE
137                       end
138                     
139                       // The current design (tlul_adapter_reg) does not spit out a request if the destination it chooses
140                       // (decoded from address) is busy. So this creates a situation in the current design where
141                       // src_req_i and busy can never be high at the same time.
142                       // While the code above could be coded directly to be expressed as `src_req & !busy`, which makes
143                       // the intent clearer, it ends up causing coverage holes from the tool's perspective since that
144                       // condition cannot be met.
145                       // Thus we add an assertion here to ensure the condition is always satisfied.
146                       `ASSERT(BusySrcReqChk_A, busy |-> !src_req, clk_src_i, !rst_src_ni)
147                     
148                       // reserved bits are not used
149                       logic unused_wd;
150        1/1            assign unused_wd = ^src_wd_i;
           Tests:       T1 T2 T3 
151                     
152                       // src_q is always updated in the clk_src domain.
153                       // when performing an update to the destination domain, it is guaranteed
154                       // to not change by protocol.
155        1/1            assign src_qs_o = src_q;
           Tests:       T74 T407 T158 
156        1/1            assign dst_wd_o = src_q;
           Tests:       T74 T407 T158 
157                     
158                       ////////////////////////////
159                       // CDC handling
160                       ////////////////////////////
161                     
162                       logic dst_req_from_src;
163                       logic dst_req;
164                     
165                     
166                       // the software transaction is pulse synced across the domain.
167                       // the prim_reg_cdc_arb module handles conflicts with ongoing hardware updates.
168                       prim_pulse_sync u_src_to_dst_req (
169                         .clk_src_i,
170                         .rst_src_ni,
171                         .clk_dst_i,
172                         .rst_dst_ni,
173                         .src_pulse_i(src_req),
174                         .dst_pulse_o(dst_req_from_src)
175                       );
176                     
177                       prim_reg_cdc_arb #(
178                         .DataWidth(DataWidth),
179                         .ResetVal(ResetVal),
180                         .DstWrReq(DstWrReq)
181                       ) u_arb (
182                         .clk_src_i,
183                         .rst_src_ni,
184                         .clk_dst_i,
185                         .rst_dst_ni,
186                         .src_ack_o(src_ack),
187                         .src_update_o(src_update),
188                         .dst_req_i(dst_req_from_src),
189                         .dst_req_o(dst_req),
190                         .dst_update_i,
191                         .dst_ds_i,
192                         .dst_qs_i,
193                         .dst_qs_o(dst_qs)
194                       );
195                     
196                     
197                       // Each is valid only when destination request pulse is high; this is important in not propagating
198                       // the internal assertion of 'dst_req' by the 'prim_pulse_sync' channel when just one domain is
199                       // reset.
200        1/1            assign {dst_we_o, dst_re_o, dst_regwen_o} = txn_bits_q & {TxnWidth{dst_req}};
           Tests:       T74 T407 T158 

---

Cond Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_2_cdc

	Total	Covered	Percent
Conditions	11	10	90.91
Logical	11	10	90.91
Non-Logical	0	0
Event	0	0

 LINE       65
 EXPRESSION (src_we_i | src_re_i)
             ----1---   ----2---

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       109
 EXPRESSION (src_busy_q & ((!src_ack)))
             -----1----   ------2-----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 EXPRESSION ((src_busy_q && src_ack) || (src_update && ((!busy))))
             -----------1-----------    ------------2------------

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_busy_q && src_ack)
                 -----1----    ---2---

-1-	-2-	Status	Tests
0	1	Not Covered
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_update && ((!busy)))
                 -----1----    ----2----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Unreachable
1	1	Unreachable

---

Branch Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_2_cdc

	Line No.	Total	Covered	Percent
Branches		8	8	100.00
IF	71	4	4	100.00
IF	115	4	4	100.00

71             if (!rst_src_ni) begin
               -1-  
72               src_busy_q <= '0;
                 ==>
73             end else if (src_req) begin
                        -2-  
74               src_busy_q <= 1'b1;
                 ==>
75             end else if (src_ack) begin
                        -3-  
76               src_busy_q <= 1'b0;
                 ==>
77             end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

115            if (!rst_src_ni) begin
               -1-  
116              src_q <= ResetVal;
                 ==>
117              txn_bits_q <= '0;
118            end else if (src_req) begin
                        -2-  
119              // See assertion below
120              // At the beginning of a software initiated transaction, the following
121              // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122              // change for the duration of the synchronization operation.
123              src_q <= src_wd_i & BitMask;
                 ==>
124              txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
125            end else if (src_busy_q && src_ack || src_update && !busy) begin
                        -3-  
126              // sample data whenever a busy transaction finishes OR
127              // when an update pulse is seen.
128              // TODO: We should add a cover group to test different sync timings
129              // between src_ack and src_update. ie. there can be 3 scenarios:
130              // 1. update one cycle before ack
131              // 2. ack one cycle before update
132              // 3. update / ack on the same cycle
133              // During all 3 cases the read data should be correct
134              src_q <= dst_qs;
                 ==>
135              txn_bits_q <= '0;
136            end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

---

Assert Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_2_cdc

	Total	Attempted	Percent	Succeeded/Matched	Percent
Assertions	4	4	100.00	4	100.00
Cover properties	0	0		0
Cover sequences	0	0		0
Total	4	4	100.00	4	100.00

---

Assertion Details

Name	Attempts	Real Successes	Failures	Incomplete
BusySrcReqChk_A	144043060	128032	0	0
DstReqKnown_A	1674537	1450796	0	0
SrcAckBusyChk_A	144043060	322	0	0
SrcBusyKnown_A	144043060	143239795	0	0

BusySrcReqChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	128032	0	0
T74	245191	291	0	0
T129	157712	0	0	0
T180	0	256	0	0
T407	0	395	0	0
T408	0	306	0	0
T421	0	285	0	0
T422	0	338	0	0
T433	0	257	0	0
T434	0	243	0	0
T435	0	423	0	0
T436	0	263	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

DstReqKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	1674537	1450796	0	0
T1	479	306	0	0
T2	382	209	0	0
T3	342	168	0	0
T4	388	214	0	0
T5	410	236	0	0
T6	460	286	0	0
T7	431	259	0	0
T28	414	241	0	0
T109	396	224	0	0
T110	315	143	0	0

SrcAckBusyChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	322	0	0
T74	245191	1	0	0
T129	157712	0	0	0
T180	0	1	0	0
T407	0	1	0	0
T408	0	1	0	0
T421	0	1	0	0
T422	0	1	0	0
T433	0	1	0	0
T434	0	1	0	0
T435	0	1	0	0
T436	0	1	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

SrcBusyKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	143239795	0	0
T1	27617	27229	0	0
T2	19812	19316	0	0
T3	10964	10508	0	0
T4	25985	25138	0	0
T5	25239	24581	0	0
T6	35891	34928	0	0
T7	25464	24868	0	0
T28	24307	23793	0	0
T109	17085	16650	0	0
T110	17700	16837	0	0

Line Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_3_cdc

	Line No.	Total	Covered	Percent
TOTAL		22	22	100.00
CONT_ASSIGN	65	1	1	100.00
ALWAYS	71	6	6	100.00
CONT_ASSIGN	85	1	1	100.00
CONT_ASSIGN	109	1	1	100.00
ALWAYS	115	9	9	100.00
CONT_ASSIGN	150	1	1	100.00
CONT_ASSIGN	155	1	1	100.00
CONT_ASSIGN	156	1	1	100.00
CONT_ASSIGN	200	1	1	100.00

64                      
65         1/1            assign src_req = src_we_i | src_re_i;
           Tests:       T74 T97 T98 
66                      
67                        // busy indication back-pressures upstream if the register is accessed
68                        // again.  The busy indication is also used as a "commit" indication for
69                        // resolving software and hardware write conflicts
70                        always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
71         1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
72         1/1                src_busy_q <= '0;
           Tests:       T1 T2 T3 
73         1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
74         1/1                src_busy_q <= 1'b1;
           Tests:       T74 T407 T158 
75         1/1              end else if (src_ack) begin
           Tests:       T1 T2 T3 
76         1/1                src_busy_q <= 1'b0;
           Tests:       T74 T407 T158 
77                          end
                        MISSING_ELSE
78                        end
79                      
80                        // A src_ack should only be sent if there was a src_req.
81                        // src_busy_q asserts whenever there is a src_req.  By association,
82                        // whenever src_ack is seen, then src_busy must be high.
83                        `ASSERT(SrcAckBusyChk_A, src_ack |-> src_busy_q, clk_src_i, !rst_src_ni)
84                      
85         1/1            assign src_busy_o = src_busy_q;
           Tests:       T74 T407 T158 
86                      
87                        // src_q acts as both the write holding register and the software read back
88                        // register.
89                        // When software performs a write, the write data is captured in src_q for
90                        // CDC purposes.  When not performing a write, the src_q reflects the most recent
91                        // hardware value. For registers with no hardware access, this is simply the
92                        // the value programmed by software (or in the case R1C, W1C etc) the value after
93                        // the operation. For registers with hardware access, this reflects a potentially
94                        // delayed version of the real value, as the software facing updates lag real
95                        // time updates.
96                        //
97                        // To resolve software and hardware conflicts, the process is as follows:
98                        // When software issues a write, this module asserts "busy".  While busy,
99                        // src_q does not take on destination value updates.  Since the
100                       // logic has committed to updating based on software command, there is an irreversible
101                       // window from which hardware writes are ignored.  Once the busy window completes,
102                       // the cdc portion then begins sampling once more.
103                       //
104                       // This is consistent with prim_subreg_arb where during software / hardware conflicts,
105                       // software is always prioritized.  The main difference is the conflict resolution window
106                       // is now larger instead of just one destination clock cycle.
107                     
108                       logic busy;
109        1/1            assign busy = src_busy_q & !src_ack;
           Tests:       T74 T407 T158 
110                     
111                       // This is the current destination value
112                       logic [DataWidth-1:0] dst_qs;
113                       logic src_update;
114                       always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
115        1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
116        1/1                src_q <= ResetVal;
           Tests:       T1 T2 T3 
117        1/1                txn_bits_q <= '0;
           Tests:       T1 T2 T3 
118        1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
119                           // See assertion below
120                           // At the beginning of a software initiated transaction, the following
121                           // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122                           // change for the duration of the synchronization operation.
123        1/1                src_q <= src_wd_i & BitMask;
           Tests:       T74 T407 T158 
124        1/1                txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
           Tests:       T74 T407 T158 
125        1/1              end else if (src_busy_q && src_ack || src_update && !busy) begin
           Tests:       T1 T2 T3 
126                           // sample data whenever a busy transaction finishes OR
127                           // when an update pulse is seen.
128                           // TODO: We should add a cover group to test different sync timings
129                           // between src_ack and src_update. ie. there can be 3 scenarios:
130                           // 1. update one cycle before ack
131                           // 2. ack one cycle before update
132                           // 3. update / ack on the same cycle
133                           // During all 3 cases the read data should be correct
134        1/1                src_q <= dst_qs;
           Tests:       T74 T407 T158 
135        1/1                txn_bits_q <= '0;
           Tests:       T74 T407 T158 
136                         end
                        MISSING_ELSE
137                       end
138                     
139                       // The current design (tlul_adapter_reg) does not spit out a request if the destination it chooses
140                       // (decoded from address) is busy. So this creates a situation in the current design where
141                       // src_req_i and busy can never be high at the same time.
142                       // While the code above could be coded directly to be expressed as `src_req & !busy`, which makes
143                       // the intent clearer, it ends up causing coverage holes from the tool's perspective since that
144                       // condition cannot be met.
145                       // Thus we add an assertion here to ensure the condition is always satisfied.
146                       `ASSERT(BusySrcReqChk_A, busy |-> !src_req, clk_src_i, !rst_src_ni)
147                     
148                       // reserved bits are not used
149                       logic unused_wd;
150        1/1            assign unused_wd = ^src_wd_i;
           Tests:       T1 T2 T3 
151                     
152                       // src_q is always updated in the clk_src domain.
153                       // when performing an update to the destination domain, it is guaranteed
154                       // to not change by protocol.
155        1/1            assign src_qs_o = src_q;
           Tests:       T74 T407 T158 
156        1/1            assign dst_wd_o = src_q;
           Tests:       T74 T407 T158 
157                     
158                       ////////////////////////////
159                       // CDC handling
160                       ////////////////////////////
161                     
162                       logic dst_req_from_src;
163                       logic dst_req;
164                     
165                     
166                       // the software transaction is pulse synced across the domain.
167                       // the prim_reg_cdc_arb module handles conflicts with ongoing hardware updates.
168                       prim_pulse_sync u_src_to_dst_req (
169                         .clk_src_i,
170                         .rst_src_ni,
171                         .clk_dst_i,
172                         .rst_dst_ni,
173                         .src_pulse_i(src_req),
174                         .dst_pulse_o(dst_req_from_src)
175                       );
176                     
177                       prim_reg_cdc_arb #(
178                         .DataWidth(DataWidth),
179                         .ResetVal(ResetVal),
180                         .DstWrReq(DstWrReq)
181                       ) u_arb (
182                         .clk_src_i,
183                         .rst_src_ni,
184                         .clk_dst_i,
185                         .rst_dst_ni,
186                         .src_ack_o(src_ack),
187                         .src_update_o(src_update),
188                         .dst_req_i(dst_req_from_src),
189                         .dst_req_o(dst_req),
190                         .dst_update_i,
191                         .dst_ds_i,
192                         .dst_qs_i,
193                         .dst_qs_o(dst_qs)
194                       );
195                     
196                     
197                       // Each is valid only when destination request pulse is high; this is important in not propagating
198                       // the internal assertion of 'dst_req' by the 'prim_pulse_sync' channel when just one domain is
199                       // reset.
200        1/1            assign {dst_we_o, dst_re_o, dst_regwen_o} = txn_bits_q & {TxnWidth{dst_req}};
           Tests:       T74 T407 T158 

---

Cond Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_3_cdc

	Total	Covered	Percent
Conditions	11	10	90.91
Logical	11	10	90.91
Non-Logical	0	0
Event	0	0

 LINE       65
 EXPRESSION (src_we_i | src_re_i)
             ----1---   ----2---

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       109
 EXPRESSION (src_busy_q & ((!src_ack)))
             -----1----   ------2-----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 EXPRESSION ((src_busy_q && src_ack) || (src_update && ((!busy))))
             -----------1-----------    ------------2------------

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_busy_q && src_ack)
                 -----1----    ---2---

-1-	-2-	Status	Tests
0	1	Not Covered
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_update && ((!busy)))
                 -----1----    ----2----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Unreachable
1	1	Unreachable

---

Branch Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_3_cdc

	Line No.	Total	Covered	Percent
Branches		8	8	100.00
IF	71	4	4	100.00
IF	115	4	4	100.00

71             if (!rst_src_ni) begin
               -1-  
72               src_busy_q <= '0;
                 ==>
73             end else if (src_req) begin
                        -2-  
74               src_busy_q <= 1'b1;
                 ==>
75             end else if (src_ack) begin
                        -3-  
76               src_busy_q <= 1'b0;
                 ==>
77             end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

115            if (!rst_src_ni) begin
               -1-  
116              src_q <= ResetVal;
                 ==>
117              txn_bits_q <= '0;
118            end else if (src_req) begin
                        -2-  
119              // See assertion below
120              // At the beginning of a software initiated transaction, the following
121              // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122              // change for the duration of the synchronization operation.
123              src_q <= src_wd_i & BitMask;
                 ==>
124              txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
125            end else if (src_busy_q && src_ack || src_update && !busy) begin
                        -3-  
126              // sample data whenever a busy transaction finishes OR
127              // when an update pulse is seen.
128              // TODO: We should add a cover group to test different sync timings
129              // between src_ack and src_update. ie. there can be 3 scenarios:
130              // 1. update one cycle before ack
131              // 2. ack one cycle before update
132              // 3. update / ack on the same cycle
133              // During all 3 cases the read data should be correct
134              src_q <= dst_qs;
                 ==>
135              txn_bits_q <= '0;
136            end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

---

Assert Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_3_cdc

	Total	Attempted	Percent	Succeeded/Matched	Percent
Assertions	4	4	100.00	4	100.00
Cover properties	0	0		0
Cover sequences	0	0		0
Total	4	4	100.00	4	100.00

---

Assertion Details

Name	Attempts	Real Successes	Failures	Incomplete
BusySrcReqChk_A	144043060	129537	0	0
DstReqKnown_A	1674537	1450796	0	0
SrcAckBusyChk_A	144043060	326	0	0
SrcBusyKnown_A	144043060	143239795	0	0

BusySrcReqChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	129537	0	0
T74	245191	296	0	0
T129	157712	0	0	0
T180	0	279	0	0
T407	0	421	0	0
T408	0	288	0	0
T421	0	316	0	0
T422	0	266	0	0
T433	0	340	0	0
T434	0	276	0	0
T435	0	408	0	0
T436	0	327	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

DstReqKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	1674537	1450796	0	0
T1	479	306	0	0
T2	382	209	0	0
T3	342	168	0	0
T4	388	214	0	0
T5	410	236	0	0
T6	460	286	0	0
T7	431	259	0	0
T28	414	241	0	0
T109	396	224	0	0
T110	315	143	0	0

SrcAckBusyChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	326	0	0
T74	245191	1	0	0
T129	157712	0	0	0
T180	0	1	0	0
T407	0	1	0	0
T408	0	1	0	0
T421	0	1	0	0
T422	0	1	0	0
T433	0	1	0	0
T434	0	1	0	0
T435	0	1	0	0
T436	0	1	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

SrcBusyKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	143239795	0	0
T1	27617	27229	0	0
T2	19812	19316	0	0
T3	10964	10508	0	0
T4	25985	25138	0	0
T5	25239	24581	0	0
T6	35891	34928	0	0
T7	25464	24868	0	0
T28	24307	23793	0	0
T109	17085	16650	0	0
T110	17700	16837	0	0

Line Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_4_cdc

	Line No.	Total	Covered	Percent
TOTAL		22	22	100.00
CONT_ASSIGN	65	1	1	100.00
ALWAYS	71	6	6	100.00
CONT_ASSIGN	85	1	1	100.00
CONT_ASSIGN	109	1	1	100.00
ALWAYS	115	9	9	100.00
CONT_ASSIGN	150	1	1	100.00
CONT_ASSIGN	155	1	1	100.00
CONT_ASSIGN	156	1	1	100.00
CONT_ASSIGN	200	1	1	100.00

64                      
65         1/1            assign src_req = src_we_i | src_re_i;
           Tests:       T74 T97 T98 
66                      
67                        // busy indication back-pressures upstream if the register is accessed
68                        // again.  The busy indication is also used as a "commit" indication for
69                        // resolving software and hardware write conflicts
70                        always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
71         1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
72         1/1                src_busy_q <= '0;
           Tests:       T1 T2 T3 
73         1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
74         1/1                src_busy_q <= 1'b1;
           Tests:       T74 T407 T158 
75         1/1              end else if (src_ack) begin
           Tests:       T1 T2 T3 
76         1/1                src_busy_q <= 1'b0;
           Tests:       T74 T407 T158 
77                          end
                        MISSING_ELSE
78                        end
79                      
80                        // A src_ack should only be sent if there was a src_req.
81                        // src_busy_q asserts whenever there is a src_req.  By association,
82                        // whenever src_ack is seen, then src_busy must be high.
83                        `ASSERT(SrcAckBusyChk_A, src_ack |-> src_busy_q, clk_src_i, !rst_src_ni)
84                      
85         1/1            assign src_busy_o = src_busy_q;
           Tests:       T74 T407 T158 
86                      
87                        // src_q acts as both the write holding register and the software read back
88                        // register.
89                        // When software performs a write, the write data is captured in src_q for
90                        // CDC purposes.  When not performing a write, the src_q reflects the most recent
91                        // hardware value. For registers with no hardware access, this is simply the
92                        // the value programmed by software (or in the case R1C, W1C etc) the value after
93                        // the operation. For registers with hardware access, this reflects a potentially
94                        // delayed version of the real value, as the software facing updates lag real
95                        // time updates.
96                        //
97                        // To resolve software and hardware conflicts, the process is as follows:
98                        // When software issues a write, this module asserts "busy".  While busy,
99                        // src_q does not take on destination value updates.  Since the
100                       // logic has committed to updating based on software command, there is an irreversible
101                       // window from which hardware writes are ignored.  Once the busy window completes,
102                       // the cdc portion then begins sampling once more.
103                       //
104                       // This is consistent with prim_subreg_arb where during software / hardware conflicts,
105                       // software is always prioritized.  The main difference is the conflict resolution window
106                       // is now larger instead of just one destination clock cycle.
107                     
108                       logic busy;
109        1/1            assign busy = src_busy_q & !src_ack;
           Tests:       T74 T407 T158 
110                     
111                       // This is the current destination value
112                       logic [DataWidth-1:0] dst_qs;
113                       logic src_update;
114                       always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
115        1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
116        1/1                src_q <= ResetVal;
           Tests:       T1 T2 T3 
117        1/1                txn_bits_q <= '0;
           Tests:       T1 T2 T3 
118        1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
119                           // See assertion below
120                           // At the beginning of a software initiated transaction, the following
121                           // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122                           // change for the duration of the synchronization operation.
123        1/1                src_q <= src_wd_i & BitMask;
           Tests:       T74 T407 T158 
124        1/1                txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
           Tests:       T74 T407 T158 
125        1/1              end else if (src_busy_q && src_ack || src_update && !busy) begin
           Tests:       T1 T2 T3 
126                           // sample data whenever a busy transaction finishes OR
127                           // when an update pulse is seen.
128                           // TODO: We should add a cover group to test different sync timings
129                           // between src_ack and src_update. ie. there can be 3 scenarios:
130                           // 1. update one cycle before ack
131                           // 2. ack one cycle before update
132                           // 3. update / ack on the same cycle
133                           // During all 3 cases the read data should be correct
134        1/1                src_q <= dst_qs;
           Tests:       T74 T407 T158 
135        1/1                txn_bits_q <= '0;
           Tests:       T74 T407 T158 
136                         end
                        MISSING_ELSE
137                       end
138                     
139                       // The current design (tlul_adapter_reg) does not spit out a request if the destination it chooses
140                       // (decoded from address) is busy. So this creates a situation in the current design where
141                       // src_req_i and busy can never be high at the same time.
142                       // While the code above could be coded directly to be expressed as `src_req & !busy`, which makes
143                       // the intent clearer, it ends up causing coverage holes from the tool's perspective since that
144                       // condition cannot be met.
145                       // Thus we add an assertion here to ensure the condition is always satisfied.
146                       `ASSERT(BusySrcReqChk_A, busy |-> !src_req, clk_src_i, !rst_src_ni)
147                     
148                       // reserved bits are not used
149                       logic unused_wd;
150        1/1            assign unused_wd = ^src_wd_i;
           Tests:       T1 T2 T3 
151                     
152                       // src_q is always updated in the clk_src domain.
153                       // when performing an update to the destination domain, it is guaranteed
154                       // to not change by protocol.
155        1/1            assign src_qs_o = src_q;
           Tests:       T74 T407 T158 
156        1/1            assign dst_wd_o = src_q;
           Tests:       T74 T407 T158 
157                     
158                       ////////////////////////////
159                       // CDC handling
160                       ////////////////////////////
161                     
162                       logic dst_req_from_src;
163                       logic dst_req;
164                     
165                     
166                       // the software transaction is pulse synced across the domain.
167                       // the prim_reg_cdc_arb module handles conflicts with ongoing hardware updates.
168                       prim_pulse_sync u_src_to_dst_req (
169                         .clk_src_i,
170                         .rst_src_ni,
171                         .clk_dst_i,
172                         .rst_dst_ni,
173                         .src_pulse_i(src_req),
174                         .dst_pulse_o(dst_req_from_src)
175                       );
176                     
177                       prim_reg_cdc_arb #(
178                         .DataWidth(DataWidth),
179                         .ResetVal(ResetVal),
180                         .DstWrReq(DstWrReq)
181                       ) u_arb (
182                         .clk_src_i,
183                         .rst_src_ni,
184                         .clk_dst_i,
185                         .rst_dst_ni,
186                         .src_ack_o(src_ack),
187                         .src_update_o(src_update),
188                         .dst_req_i(dst_req_from_src),
189                         .dst_req_o(dst_req),
190                         .dst_update_i,
191                         .dst_ds_i,
192                         .dst_qs_i,
193                         .dst_qs_o(dst_qs)
194                       );
195                     
196                     
197                       // Each is valid only when destination request pulse is high; this is important in not propagating
198                       // the internal assertion of 'dst_req' by the 'prim_pulse_sync' channel when just one domain is
199                       // reset.
200        1/1            assign {dst_we_o, dst_re_o, dst_regwen_o} = txn_bits_q & {TxnWidth{dst_req}};
           Tests:       T74 T407 T158 

---

Cond Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_4_cdc

	Total	Covered	Percent
Conditions	11	10	90.91
Logical	11	10	90.91
Non-Logical	0	0
Event	0	0

 LINE       65
 EXPRESSION (src_we_i | src_re_i)
             ----1---   ----2---

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       109
 EXPRESSION (src_busy_q & ((!src_ack)))
             -----1----   ------2-----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 EXPRESSION ((src_busy_q && src_ack) || (src_update && ((!busy))))
             -----------1-----------    ------------2------------

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_busy_q && src_ack)
                 -----1----    ---2---

-1-	-2-	Status	Tests
0	1	Not Covered
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_update && ((!busy)))
                 -----1----    ----2----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Unreachable
1	1	Unreachable

---

Branch Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_4_cdc

	Line No.	Total	Covered	Percent
Branches		8	8	100.00
IF	71	4	4	100.00
IF	115	4	4	100.00

71             if (!rst_src_ni) begin
               -1-  
72               src_busy_q <= '0;
                 ==>
73             end else if (src_req) begin
                        -2-  
74               src_busy_q <= 1'b1;
                 ==>
75             end else if (src_ack) begin
                        -3-  
76               src_busy_q <= 1'b0;
                 ==>
77             end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

115            if (!rst_src_ni) begin
               -1-  
116              src_q <= ResetVal;
                 ==>
117              txn_bits_q <= '0;
118            end else if (src_req) begin
                        -2-  
119              // See assertion below
120              // At the beginning of a software initiated transaction, the following
121              // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122              // change for the duration of the synchronization operation.
123              src_q <= src_wd_i & BitMask;
                 ==>
124              txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
125            end else if (src_busy_q && src_ack || src_update && !busy) begin
                        -3-  
126              // sample data whenever a busy transaction finishes OR
127              // when an update pulse is seen.
128              // TODO: We should add a cover group to test different sync timings
129              // between src_ack and src_update. ie. there can be 3 scenarios:
130              // 1. update one cycle before ack
131              // 2. ack one cycle before update
132              // 3. update / ack on the same cycle
133              // During all 3 cases the read data should be correct
134              src_q <= dst_qs;
                 ==>
135              txn_bits_q <= '0;
136            end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

---

Assert Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_4_cdc

	Total	Attempted	Percent	Succeeded/Matched	Percent
Assertions	4	4	100.00	4	100.00
Cover properties	0	0		0
Cover sequences	0	0		0
Total	4	4	100.00	4	100.00

---

Assertion Details

Name	Attempts	Real Successes	Failures	Incomplete
BusySrcReqChk_A	144043060	119002	0	0
DstReqKnown_A	1674537	1450796	0	0
SrcAckBusyChk_A	144043060	298	0	0
SrcBusyKnown_A	144043060	143239795	0	0

BusySrcReqChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	119002	0	0
T74	245191	256	0	0
T129	157712	0	0	0
T180	0	263	0	0
T407	0	468	0	0
T408	0	285	0	0
T421	0	252	0	0
T422	0	314	0	0
T433	0	242	0	0
T434	0	358	0	0
T435	0	463	0	0
T436	0	265	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

DstReqKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	1674537	1450796	0	0
T1	479	306	0	0
T2	382	209	0	0
T3	342	168	0	0
T4	388	214	0	0
T5	410	236	0	0
T6	460	286	0	0
T7	431	259	0	0
T28	414	241	0	0
T109	396	224	0	0
T110	315	143	0	0

SrcAckBusyChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	298	0	0
T74	245191	1	0	0
T129	157712	0	0	0
T180	0	1	0	0
T407	0	1	0	0
T408	0	1	0	0
T421	0	1	0	0
T422	0	1	0	0
T433	0	1	0	0
T434	0	1	0	0
T435	0	1	0	0
T436	0	1	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

SrcBusyKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	143239795	0	0
T1	27617	27229	0	0
T2	19812	19316	0	0
T3	10964	10508	0	0
T4	25985	25138	0	0
T5	25239	24581	0	0
T6	35891	34928	0	0
T7	25464	24868	0	0
T28	24307	23793	0	0
T109	17085	16650	0	0
T110	17700	16837	0	0

Line Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_5_cdc

	Line No.	Total	Covered	Percent
TOTAL		22	22	100.00
CONT_ASSIGN	65	1	1	100.00
ALWAYS	71	6	6	100.00
CONT_ASSIGN	85	1	1	100.00
CONT_ASSIGN	109	1	1	100.00
ALWAYS	115	9	9	100.00
CONT_ASSIGN	150	1	1	100.00
CONT_ASSIGN	155	1	1	100.00
CONT_ASSIGN	156	1	1	100.00
CONT_ASSIGN	200	1	1	100.00

64                      
65         1/1            assign src_req = src_we_i | src_re_i;
           Tests:       T74 T97 T98 
66                      
67                        // busy indication back-pressures upstream if the register is accessed
68                        // again.  The busy indication is also used as a "commit" indication for
69                        // resolving software and hardware write conflicts
70                        always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
71         1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
72         1/1                src_busy_q <= '0;
           Tests:       T1 T2 T3 
73         1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
74         1/1                src_busy_q <= 1'b1;
           Tests:       T74 T407 T158 
75         1/1              end else if (src_ack) begin
           Tests:       T1 T2 T3 
76         1/1                src_busy_q <= 1'b0;
           Tests:       T74 T407 T158 
77                          end
                        MISSING_ELSE
78                        end
79                      
80                        // A src_ack should only be sent if there was a src_req.
81                        // src_busy_q asserts whenever there is a src_req.  By association,
82                        // whenever src_ack is seen, then src_busy must be high.
83                        `ASSERT(SrcAckBusyChk_A, src_ack |-> src_busy_q, clk_src_i, !rst_src_ni)
84                      
85         1/1            assign src_busy_o = src_busy_q;
           Tests:       T74 T407 T158 
86                      
87                        // src_q acts as both the write holding register and the software read back
88                        // register.
89                        // When software performs a write, the write data is captured in src_q for
90                        // CDC purposes.  When not performing a write, the src_q reflects the most recent
91                        // hardware value. For registers with no hardware access, this is simply the
92                        // the value programmed by software (or in the case R1C, W1C etc) the value after
93                        // the operation. For registers with hardware access, this reflects a potentially
94                        // delayed version of the real value, as the software facing updates lag real
95                        // time updates.
96                        //
97                        // To resolve software and hardware conflicts, the process is as follows:
98                        // When software issues a write, this module asserts "busy".  While busy,
99                        // src_q does not take on destination value updates.  Since the
100                       // logic has committed to updating based on software command, there is an irreversible
101                       // window from which hardware writes are ignored.  Once the busy window completes,
102                       // the cdc portion then begins sampling once more.
103                       //
104                       // This is consistent with prim_subreg_arb where during software / hardware conflicts,
105                       // software is always prioritized.  The main difference is the conflict resolution window
106                       // is now larger instead of just one destination clock cycle.
107                     
108                       logic busy;
109        1/1            assign busy = src_busy_q & !src_ack;
           Tests:       T74 T407 T158 
110                     
111                       // This is the current destination value
112                       logic [DataWidth-1:0] dst_qs;
113                       logic src_update;
114                       always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
115        1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
116        1/1                src_q <= ResetVal;
           Tests:       T1 T2 T3 
117        1/1                txn_bits_q <= '0;
           Tests:       T1 T2 T3 
118        1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
119                           // See assertion below
120                           // At the beginning of a software initiated transaction, the following
121                           // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122                           // change for the duration of the synchronization operation.
123        1/1                src_q <= src_wd_i & BitMask;
           Tests:       T74 T407 T158 
124        1/1                txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
           Tests:       T74 T407 T158 
125        1/1              end else if (src_busy_q && src_ack || src_update && !busy) begin
           Tests:       T1 T2 T3 
126                           // sample data whenever a busy transaction finishes OR
127                           // when an update pulse is seen.
128                           // TODO: We should add a cover group to test different sync timings
129                           // between src_ack and src_update. ie. there can be 3 scenarios:
130                           // 1. update one cycle before ack
131                           // 2. ack one cycle before update
132                           // 3. update / ack on the same cycle
133                           // During all 3 cases the read data should be correct
134        1/1                src_q <= dst_qs;
           Tests:       T74 T407 T158 
135        1/1                txn_bits_q <= '0;
           Tests:       T74 T407 T158 
136                         end
                        MISSING_ELSE
137                       end
138                     
139                       // The current design (tlul_adapter_reg) does not spit out a request if the destination it chooses
140                       // (decoded from address) is busy. So this creates a situation in the current design where
141                       // src_req_i and busy can never be high at the same time.
142                       // While the code above could be coded directly to be expressed as `src_req & !busy`, which makes
143                       // the intent clearer, it ends up causing coverage holes from the tool's perspective since that
144                       // condition cannot be met.
145                       // Thus we add an assertion here to ensure the condition is always satisfied.
146                       `ASSERT(BusySrcReqChk_A, busy |-> !src_req, clk_src_i, !rst_src_ni)
147                     
148                       // reserved bits are not used
149                       logic unused_wd;
150        1/1            assign unused_wd = ^src_wd_i;
           Tests:       T1 T2 T3 
151                     
152                       // src_q is always updated in the clk_src domain.
153                       // when performing an update to the destination domain, it is guaranteed
154                       // to not change by protocol.
155        1/1            assign src_qs_o = src_q;
           Tests:       T74 T407 T158 
156        1/1            assign dst_wd_o = src_q;
           Tests:       T74 T407 T158 
157                     
158                       ////////////////////////////
159                       // CDC handling
160                       ////////////////////////////
161                     
162                       logic dst_req_from_src;
163                       logic dst_req;
164                     
165                     
166                       // the software transaction is pulse synced across the domain.
167                       // the prim_reg_cdc_arb module handles conflicts with ongoing hardware updates.
168                       prim_pulse_sync u_src_to_dst_req (
169                         .clk_src_i,
170                         .rst_src_ni,
171                         .clk_dst_i,
172                         .rst_dst_ni,
173                         .src_pulse_i(src_req),
174                         .dst_pulse_o(dst_req_from_src)
175                       );
176                     
177                       prim_reg_cdc_arb #(
178                         .DataWidth(DataWidth),
179                         .ResetVal(ResetVal),
180                         .DstWrReq(DstWrReq)
181                       ) u_arb (
182                         .clk_src_i,
183                         .rst_src_ni,
184                         .clk_dst_i,
185                         .rst_dst_ni,
186                         .src_ack_o(src_ack),
187                         .src_update_o(src_update),
188                         .dst_req_i(dst_req_from_src),
189                         .dst_req_o(dst_req),
190                         .dst_update_i,
191                         .dst_ds_i,
192                         .dst_qs_i,
193                         .dst_qs_o(dst_qs)
194                       );
195                     
196                     
197                       // Each is valid only when destination request pulse is high; this is important in not propagating
198                       // the internal assertion of 'dst_req' by the 'prim_pulse_sync' channel when just one domain is
199                       // reset.
200        1/1            assign {dst_we_o, dst_re_o, dst_regwen_o} = txn_bits_q & {TxnWidth{dst_req}};
           Tests:       T74 T407 T158 

---

Cond Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_5_cdc

	Total	Covered	Percent
Conditions	11	10	90.91
Logical	11	10	90.91
Non-Logical	0	0
Event	0	0

 LINE       65
 EXPRESSION (src_we_i | src_re_i)
             ----1---   ----2---

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T103,T407

 LINE       109
 EXPRESSION (src_busy_q & ((!src_ack)))
             -----1----   ------2-----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 EXPRESSION ((src_busy_q && src_ack) || (src_update && ((!busy))))
             -----------1-----------    ------------2------------

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_busy_q && src_ack)
                 -----1----    ---2---

-1-	-2-	Status	Tests
0	1	Not Covered
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_update && ((!busy)))
                 -----1----    ----2----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Unreachable
1	1	Unreachable

---

Branch Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_5_cdc

	Line No.	Total	Covered	Percent
Branches		8	8	100.00
IF	71	4	4	100.00
IF	115	4	4	100.00

71             if (!rst_src_ni) begin
               -1-  
72               src_busy_q <= '0;
                 ==>
73             end else if (src_req) begin
                        -2-  
74               src_busy_q <= 1'b1;
                 ==>
75             end else if (src_ack) begin
                        -3-  
76               src_busy_q <= 1'b0;
                 ==>
77             end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

115            if (!rst_src_ni) begin
               -1-  
116              src_q <= ResetVal;
                 ==>
117              txn_bits_q <= '0;
118            end else if (src_req) begin
                        -2-  
119              // See assertion below
120              // At the beginning of a software initiated transaction, the following
121              // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122              // change for the duration of the synchronization operation.
123              src_q <= src_wd_i & BitMask;
                 ==>
124              txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
125            end else if (src_busy_q && src_ack || src_update && !busy) begin
                        -3-  
126              // sample data whenever a busy transaction finishes OR
127              // when an update pulse is seen.
128              // TODO: We should add a cover group to test different sync timings
129              // between src_ack and src_update. ie. there can be 3 scenarios:
130              // 1. update one cycle before ack
131              // 2. ack one cycle before update
132              // 3. update / ack on the same cycle
133              // During all 3 cases the read data should be correct
134              src_q <= dst_qs;
                 ==>
135              txn_bits_q <= '0;
136            end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

---

Assert Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_5_cdc

	Total	Attempted	Percent	Succeeded/Matched	Percent
Assertions	4	4	100.00	4	100.00
Cover properties	0	0		0
Cover sequences	0	0		0
Total	4	4	100.00	4	100.00

---

Assertion Details

Name	Attempts	Real Successes	Failures	Incomplete
BusySrcReqChk_A	144043060	118018	0	0
DstReqKnown_A	1674537	1450796	0	0
SrcAckBusyChk_A	144043060	299	0	0
SrcBusyKnown_A	144043060	143239795	0	0

BusySrcReqChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	118018	0	0
T74	245191	281	0	0
T129	157712	0	0	0
T180	0	254	0	0
T407	0	391	0	0
T408	0	339	0	0
T421	0	300	0	0
T422	0	321	0	0
T433	0	267	0	0
T434	0	275	0	0
T435	0	414	0	0
T436	0	305	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

DstReqKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	1674537	1450796	0	0
T1	479	306	0	0
T2	382	209	0	0
T3	342	168	0	0
T4	388	214	0	0
T5	410	236	0	0
T6	460	286	0	0
T7	431	259	0	0
T28	414	241	0	0
T109	396	224	0	0
T110	315	143	0	0

SrcAckBusyChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	299	0	0
T74	245191	1	0	0
T129	157712	0	0	0
T180	0	1	0	0
T407	0	1	0	0
T408	0	1	0	0
T421	0	1	0	0
T422	0	1	0	0
T433	0	1	0	0
T434	0	1	0	0
T435	0	1	0	0
T436	0	1	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

SrcBusyKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	143239795	0	0
T1	27617	27229	0	0
T2	19812	19316	0	0
T3	10964	10508	0	0
T4	25985	25138	0	0
T5	25239	24581	0	0
T6	35891	34928	0	0
T7	25464	24868	0	0
T28	24307	23793	0	0
T109	17085	16650	0	0
T110	17700	16837	0	0

Line Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_6_cdc

	Line No.	Total	Covered	Percent
TOTAL		22	22	100.00
CONT_ASSIGN	65	1	1	100.00
ALWAYS	71	6	6	100.00
CONT_ASSIGN	85	1	1	100.00
CONT_ASSIGN	109	1	1	100.00
ALWAYS	115	9	9	100.00
CONT_ASSIGN	150	1	1	100.00
CONT_ASSIGN	155	1	1	100.00
CONT_ASSIGN	156	1	1	100.00
CONT_ASSIGN	200	1	1	100.00

64                      
65         1/1            assign src_req = src_we_i | src_re_i;
           Tests:       T74 T97 T98 
66                      
67                        // busy indication back-pressures upstream if the register is accessed
68                        // again.  The busy indication is also used as a "commit" indication for
69                        // resolving software and hardware write conflicts
70                        always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
71         1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
72         1/1                src_busy_q <= '0;
           Tests:       T1 T2 T3 
73         1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
74         1/1                src_busy_q <= 1'b1;
           Tests:       T74 T407 T158 
75         1/1              end else if (src_ack) begin
           Tests:       T1 T2 T3 
76         1/1                src_busy_q <= 1'b0;
           Tests:       T74 T407 T158 
77                          end
                        MISSING_ELSE
78                        end
79                      
80                        // A src_ack should only be sent if there was a src_req.
81                        // src_busy_q asserts whenever there is a src_req.  By association,
82                        // whenever src_ack is seen, then src_busy must be high.
83                        `ASSERT(SrcAckBusyChk_A, src_ack |-> src_busy_q, clk_src_i, !rst_src_ni)
84                      
85         1/1            assign src_busy_o = src_busy_q;
           Tests:       T74 T407 T158 
86                      
87                        // src_q acts as both the write holding register and the software read back
88                        // register.
89                        // When software performs a write, the write data is captured in src_q for
90                        // CDC purposes.  When not performing a write, the src_q reflects the most recent
91                        // hardware value. For registers with no hardware access, this is simply the
92                        // the value programmed by software (or in the case R1C, W1C etc) the value after
93                        // the operation. For registers with hardware access, this reflects a potentially
94                        // delayed version of the real value, as the software facing updates lag real
95                        // time updates.
96                        //
97                        // To resolve software and hardware conflicts, the process is as follows:
98                        // When software issues a write, this module asserts "busy".  While busy,
99                        // src_q does not take on destination value updates.  Since the
100                       // logic has committed to updating based on software command, there is an irreversible
101                       // window from which hardware writes are ignored.  Once the busy window completes,
102                       // the cdc portion then begins sampling once more.
103                       //
104                       // This is consistent with prim_subreg_arb where during software / hardware conflicts,
105                       // software is always prioritized.  The main difference is the conflict resolution window
106                       // is now larger instead of just one destination clock cycle.
107                     
108                       logic busy;
109        1/1            assign busy = src_busy_q & !src_ack;
           Tests:       T74 T407 T158 
110                     
111                       // This is the current destination value
112                       logic [DataWidth-1:0] dst_qs;
113                       logic src_update;
114                       always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
115        1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
116        1/1                src_q <= ResetVal;
           Tests:       T1 T2 T3 
117        1/1                txn_bits_q <= '0;
           Tests:       T1 T2 T3 
118        1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
119                           // See assertion below
120                           // At the beginning of a software initiated transaction, the following
121                           // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122                           // change for the duration of the synchronization operation.
123        1/1                src_q <= src_wd_i & BitMask;
           Tests:       T74 T407 T158 
124        1/1                txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
           Tests:       T74 T407 T158 
125        1/1              end else if (src_busy_q && src_ack || src_update && !busy) begin
           Tests:       T1 T2 T3 
126                           // sample data whenever a busy transaction finishes OR
127                           // when an update pulse is seen.
128                           // TODO: We should add a cover group to test different sync timings
129                           // between src_ack and src_update. ie. there can be 3 scenarios:
130                           // 1. update one cycle before ack
131                           // 2. ack one cycle before update
132                           // 3. update / ack on the same cycle
133                           // During all 3 cases the read data should be correct
134        1/1                src_q <= dst_qs;
           Tests:       T74 T407 T158 
135        1/1                txn_bits_q <= '0;
           Tests:       T74 T407 T158 
136                         end
                        MISSING_ELSE
137                       end
138                     
139                       // The current design (tlul_adapter_reg) does not spit out a request if the destination it chooses
140                       // (decoded from address) is busy. So this creates a situation in the current design where
141                       // src_req_i and busy can never be high at the same time.
142                       // While the code above could be coded directly to be expressed as `src_req & !busy`, which makes
143                       // the intent clearer, it ends up causing coverage holes from the tool's perspective since that
144                       // condition cannot be met.
145                       // Thus we add an assertion here to ensure the condition is always satisfied.
146                       `ASSERT(BusySrcReqChk_A, busy |-> !src_req, clk_src_i, !rst_src_ni)
147                     
148                       // reserved bits are not used
149                       logic unused_wd;
150        1/1            assign unused_wd = ^src_wd_i;
           Tests:       T1 T2 T3 
151                     
152                       // src_q is always updated in the clk_src domain.
153                       // when performing an update to the destination domain, it is guaranteed
154                       // to not change by protocol.
155        1/1            assign src_qs_o = src_q;
           Tests:       T74 T407 T158 
156        1/1            assign dst_wd_o = src_q;
           Tests:       T74 T407 T158 
157                     
158                       ////////////////////////////
159                       // CDC handling
160                       ////////////////////////////
161                     
162                       logic dst_req_from_src;
163                       logic dst_req;
164                     
165                     
166                       // the software transaction is pulse synced across the domain.
167                       // the prim_reg_cdc_arb module handles conflicts with ongoing hardware updates.
168                       prim_pulse_sync u_src_to_dst_req (
169                         .clk_src_i,
170                         .rst_src_ni,
171                         .clk_dst_i,
172                         .rst_dst_ni,
173                         .src_pulse_i(src_req),
174                         .dst_pulse_o(dst_req_from_src)
175                       );
176                     
177                       prim_reg_cdc_arb #(
178                         .DataWidth(DataWidth),
179                         .ResetVal(ResetVal),
180                         .DstWrReq(DstWrReq)
181                       ) u_arb (
182                         .clk_src_i,
183                         .rst_src_ni,
184                         .clk_dst_i,
185                         .rst_dst_ni,
186                         .src_ack_o(src_ack),
187                         .src_update_o(src_update),
188                         .dst_req_i(dst_req_from_src),
189                         .dst_req_o(dst_req),
190                         .dst_update_i,
191                         .dst_ds_i,
192                         .dst_qs_i,
193                         .dst_qs_o(dst_qs)
194                       );
195                     
196                     
197                       // Each is valid only when destination request pulse is high; this is important in not propagating
198                       // the internal assertion of 'dst_req' by the 'prim_pulse_sync' channel when just one domain is
199                       // reset.
200        1/1            assign {dst_we_o, dst_re_o, dst_regwen_o} = txn_bits_q & {TxnWidth{dst_req}};
           Tests:       T74 T407 T158 

---

Cond Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_6_cdc

	Total	Covered	Percent
Conditions	11	10	90.91
Logical	11	10	90.91
Non-Logical	0	0
Event	0	0

 LINE       65
 EXPRESSION (src_we_i | src_re_i)
             ----1---   ----2---

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T104,T407

 LINE       109
 EXPRESSION (src_busy_q & ((!src_ack)))
             -----1----   ------2-----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 EXPRESSION ((src_busy_q && src_ack) || (src_update && ((!busy))))
             -----------1-----------    ------------2------------

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_busy_q && src_ack)
                 -----1----    ---2---

-1-	-2-	Status	Tests
0	1	Not Covered
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_update && ((!busy)))
                 -----1----    ----2----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Unreachable
1	1	Unreachable

---

Branch Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_6_cdc

	Line No.	Total	Covered	Percent
Branches		8	8	100.00
IF	71	4	4	100.00
IF	115	4	4	100.00

71             if (!rst_src_ni) begin
               -1-  
72               src_busy_q <= '0;
                 ==>
73             end else if (src_req) begin
                        -2-  
74               src_busy_q <= 1'b1;
                 ==>
75             end else if (src_ack) begin
                        -3-  
76               src_busy_q <= 1'b0;
                 ==>
77             end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

115            if (!rst_src_ni) begin
               -1-  
116              src_q <= ResetVal;
                 ==>
117              txn_bits_q <= '0;
118            end else if (src_req) begin
                        -2-  
119              // See assertion below
120              // At the beginning of a software initiated transaction, the following
121              // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122              // change for the duration of the synchronization operation.
123              src_q <= src_wd_i & BitMask;
                 ==>
124              txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
125            end else if (src_busy_q && src_ack || src_update && !busy) begin
                        -3-  
126              // sample data whenever a busy transaction finishes OR
127              // when an update pulse is seen.
128              // TODO: We should add a cover group to test different sync timings
129              // between src_ack and src_update. ie. there can be 3 scenarios:
130              // 1. update one cycle before ack
131              // 2. ack one cycle before update
132              // 3. update / ack on the same cycle
133              // During all 3 cases the read data should be correct
134              src_q <= dst_qs;
                 ==>
135              txn_bits_q <= '0;
136            end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

---

Assert Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_6_cdc

	Total	Attempted	Percent	Succeeded/Matched	Percent
Assertions	4	4	100.00	4	100.00
Cover properties	0	0		0
Cover sequences	0	0		0
Total	4	4	100.00	4	100.00

---

Assertion Details

Name	Attempts	Real Successes	Failures	Incomplete
BusySrcReqChk_A	144043060	126654	0	0
DstReqKnown_A	1674537	1450796	0	0
SrcAckBusyChk_A	144043060	319	0	0
SrcBusyKnown_A	144043060	143239795	0	0

BusySrcReqChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	126654	0	0
T74	245191	322	0	0
T129	157712	0	0	0
T180	0	267	0	0
T407	0	414	0	0
T408	0	301	0	0
T421	0	323	0	0
T422	0	278	0	0
T433	0	316	0	0
T434	0	300	0	0
T435	0	452	0	0
T436	0	297	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

DstReqKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	1674537	1450796	0	0
T1	479	306	0	0
T2	382	209	0	0
T3	342	168	0	0
T4	388	214	0	0
T5	410	236	0	0
T6	460	286	0	0
T7	431	259	0	0
T28	414	241	0	0
T109	396	224	0	0
T110	315	143	0	0

SrcAckBusyChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	319	0	0
T74	245191	1	0	0
T129	157712	0	0	0
T180	0	1	0	0
T407	0	1	0	0
T408	0	1	0	0
T421	0	1	0	0
T422	0	1	0	0
T433	0	1	0	0
T434	0	1	0	0
T435	0	1	0	0
T436	0	1	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

SrcBusyKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	143239795	0	0
T1	27617	27229	0	0
T2	19812	19316	0	0
T3	10964	10508	0	0
T4	25985	25138	0	0
T5	25239	24581	0	0
T6	35891	34928	0	0
T7	25464	24868	0	0
T28	24307	23793	0	0
T109	17085	16650	0	0
T110	17700	16837	0	0

Line Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_7_cdc

	Line No.	Total	Covered	Percent
TOTAL		22	22	100.00
CONT_ASSIGN	65	1	1	100.00
ALWAYS	71	6	6	100.00
CONT_ASSIGN	85	1	1	100.00
CONT_ASSIGN	109	1	1	100.00
ALWAYS	115	9	9	100.00
CONT_ASSIGN	150	1	1	100.00
CONT_ASSIGN	155	1	1	100.00
CONT_ASSIGN	156	1	1	100.00
CONT_ASSIGN	200	1	1	100.00

64                      
65         1/1            assign src_req = src_we_i | src_re_i;
           Tests:       T74 T97 T98 
66                      
67                        // busy indication back-pressures upstream if the register is accessed
68                        // again.  The busy indication is also used as a "commit" indication for
69                        // resolving software and hardware write conflicts
70                        always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
71         1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
72         1/1                src_busy_q <= '0;
           Tests:       T1 T2 T3 
73         1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
74         1/1                src_busy_q <= 1'b1;
           Tests:       T74 T407 T158 
75         1/1              end else if (src_ack) begin
           Tests:       T1 T2 T3 
76         1/1                src_busy_q <= 1'b0;
           Tests:       T74 T407 T158 
77                          end
                        MISSING_ELSE
78                        end
79                      
80                        // A src_ack should only be sent if there was a src_req.
81                        // src_busy_q asserts whenever there is a src_req.  By association,
82                        // whenever src_ack is seen, then src_busy must be high.
83                        `ASSERT(SrcAckBusyChk_A, src_ack |-> src_busy_q, clk_src_i, !rst_src_ni)
84                      
85         1/1            assign src_busy_o = src_busy_q;
           Tests:       T74 T407 T158 
86                      
87                        // src_q acts as both the write holding register and the software read back
88                        // register.
89                        // When software performs a write, the write data is captured in src_q for
90                        // CDC purposes.  When not performing a write, the src_q reflects the most recent
91                        // hardware value. For registers with no hardware access, this is simply the
92                        // the value programmed by software (or in the case R1C, W1C etc) the value after
93                        // the operation. For registers with hardware access, this reflects a potentially
94                        // delayed version of the real value, as the software facing updates lag real
95                        // time updates.
96                        //
97                        // To resolve software and hardware conflicts, the process is as follows:
98                        // When software issues a write, this module asserts "busy".  While busy,
99                        // src_q does not take on destination value updates.  Since the
100                       // logic has committed to updating based on software command, there is an irreversible
101                       // window from which hardware writes are ignored.  Once the busy window completes,
102                       // the cdc portion then begins sampling once more.
103                       //
104                       // This is consistent with prim_subreg_arb where during software / hardware conflicts,
105                       // software is always prioritized.  The main difference is the conflict resolution window
106                       // is now larger instead of just one destination clock cycle.
107                     
108                       logic busy;
109        1/1            assign busy = src_busy_q & !src_ack;
           Tests:       T74 T407 T158 
110                     
111                       // This is the current destination value
112                       logic [DataWidth-1:0] dst_qs;
113                       logic src_update;
114                       always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
115        1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
116        1/1                src_q <= ResetVal;
           Tests:       T1 T2 T3 
117        1/1                txn_bits_q <= '0;
           Tests:       T1 T2 T3 
118        1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
119                           // See assertion below
120                           // At the beginning of a software initiated transaction, the following
121                           // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122                           // change for the duration of the synchronization operation.
123        1/1                src_q <= src_wd_i & BitMask;
           Tests:       T74 T407 T158 
124        1/1                txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
           Tests:       T74 T407 T158 
125        1/1              end else if (src_busy_q && src_ack || src_update && !busy) begin
           Tests:       T1 T2 T3 
126                           // sample data whenever a busy transaction finishes OR
127                           // when an update pulse is seen.
128                           // TODO: We should add a cover group to test different sync timings
129                           // between src_ack and src_update. ie. there can be 3 scenarios:
130                           // 1. update one cycle before ack
131                           // 2. ack one cycle before update
132                           // 3. update / ack on the same cycle
133                           // During all 3 cases the read data should be correct
134        1/1                src_q <= dst_qs;
           Tests:       T74 T407 T158 
135        1/1                txn_bits_q <= '0;
           Tests:       T74 T407 T158 
136                         end
                        MISSING_ELSE
137                       end
138                     
139                       // The current design (tlul_adapter_reg) does not spit out a request if the destination it chooses
140                       // (decoded from address) is busy. So this creates a situation in the current design where
141                       // src_req_i and busy can never be high at the same time.
142                       // While the code above could be coded directly to be expressed as `src_req & !busy`, which makes
143                       // the intent clearer, it ends up causing coverage holes from the tool's perspective since that
144                       // condition cannot be met.
145                       // Thus we add an assertion here to ensure the condition is always satisfied.
146                       `ASSERT(BusySrcReqChk_A, busy |-> !src_req, clk_src_i, !rst_src_ni)
147                     
148                       // reserved bits are not used
149                       logic unused_wd;
150        1/1            assign unused_wd = ^src_wd_i;
           Tests:       T1 T2 T3 
151                     
152                       // src_q is always updated in the clk_src domain.
153                       // when performing an update to the destination domain, it is guaranteed
154                       // to not change by protocol.
155        1/1            assign src_qs_o = src_q;
           Tests:       T74 T407 T158 
156        1/1            assign dst_wd_o = src_q;
           Tests:       T74 T407 T158 
157                     
158                       ////////////////////////////
159                       // CDC handling
160                       ////////////////////////////
161                     
162                       logic dst_req_from_src;
163                       logic dst_req;
164                     
165                     
166                       // the software transaction is pulse synced across the domain.
167                       // the prim_reg_cdc_arb module handles conflicts with ongoing hardware updates.
168                       prim_pulse_sync u_src_to_dst_req (
169                         .clk_src_i,
170                         .rst_src_ni,
171                         .clk_dst_i,
172                         .rst_dst_ni,
173                         .src_pulse_i(src_req),
174                         .dst_pulse_o(dst_req_from_src)
175                       );
176                     
177                       prim_reg_cdc_arb #(
178                         .DataWidth(DataWidth),
179                         .ResetVal(ResetVal),
180                         .DstWrReq(DstWrReq)
181                       ) u_arb (
182                         .clk_src_i,
183                         .rst_src_ni,
184                         .clk_dst_i,
185                         .rst_dst_ni,
186                         .src_ack_o(src_ack),
187                         .src_update_o(src_update),
188                         .dst_req_i(dst_req_from_src),
189                         .dst_req_o(dst_req),
190                         .dst_update_i,
191                         .dst_ds_i,
192                         .dst_qs_i,
193                         .dst_qs_o(dst_qs)
194                       );
195                     
196                     
197                       // Each is valid only when destination request pulse is high; this is important in not propagating
198                       // the internal assertion of 'dst_req' by the 'prim_pulse_sync' channel when just one domain is
199                       // reset.
200        1/1            assign {dst_we_o, dst_re_o, dst_regwen_o} = txn_bits_q & {TxnWidth{dst_req}};
           Tests:       T74 T407 T158 

---

Cond Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_7_cdc

	Total	Covered	Percent
Conditions	11	10	90.91
Logical	11	10	90.91
Non-Logical	0	0
Event	0	0

 LINE       65
 EXPRESSION (src_we_i | src_re_i)
             ----1---   ----2---

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       109
 EXPRESSION (src_busy_q & ((!src_ack)))
             -----1----   ------2-----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 EXPRESSION ((src_busy_q && src_ack) || (src_update && ((!busy))))
             -----------1-----------    ------------2------------

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_busy_q && src_ack)
                 -----1----    ---2---

-1-	-2-	Status	Tests
0	1	Not Covered
1	0	Covered	T74,T407,T158
1	1	Covered	T74,T407,T158

 LINE       125
 SUB-EXPRESSION (src_update && ((!busy)))
                 -----1----    ----2----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Unreachable
1	1	Unreachable

---

Branch Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_7_cdc

	Line No.	Total	Covered	Percent
Branches		8	8	100.00
IF	71	4	4	100.00
IF	115	4	4	100.00

71             if (!rst_src_ni) begin
               -1-  
72               src_busy_q <= '0;
                 ==>
73             end else if (src_req) begin
                        -2-  
74               src_busy_q <= 1'b1;
                 ==>
75             end else if (src_ack) begin
                        -3-  
76               src_busy_q <= 1'b0;
                 ==>
77             end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

115            if (!rst_src_ni) begin
               -1-  
116              src_q <= ResetVal;
                 ==>
117              txn_bits_q <= '0;
118            end else if (src_req) begin
                        -2-  
119              // See assertion below
120              // At the beginning of a software initiated transaction, the following
121              // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122              // change for the duration of the synchronization operation.
123              src_q <= src_wd_i & BitMask;
                 ==>
124              txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
125            end else if (src_busy_q && src_ack || src_update && !busy) begin
                        -3-  
126              // sample data whenever a busy transaction finishes OR
127              // when an update pulse is seen.
128              // TODO: We should add a cover group to test different sync timings
129              // between src_ack and src_update. ie. there can be 3 scenarios:
130              // 1. update one cycle before ack
131              // 2. ack one cycle before update
132              // 3. update / ack on the same cycle
133              // During all 3 cases the read data should be correct
134              src_q <= dst_qs;
                 ==>
135              txn_bits_q <= '0;
136            end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T74,T407,T158
0	0	1	Covered	T74,T407,T158
0	0	0	Covered	T1,T2,T3

---

Assert Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_detector_cnt_th_7_cdc

	Total	Attempted	Percent	Succeeded/Matched	Percent
Assertions	4	4	100.00	4	100.00
Cover properties	0	0		0
Cover sequences	0	0		0
Total	4	4	100.00	4	100.00

---

Assertion Details

Name	Attempts	Real Successes	Failures	Incomplete
BusySrcReqChk_A	144043060	107256	0	0
DstReqKnown_A	1674537	1450796	0	0
SrcAckBusyChk_A	144043060	273	0	0
SrcBusyKnown_A	144043060	143239795	0	0

BusySrcReqChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	107256	0	0
T74	245191	288	0	0
T129	157712	0	0	0
T180	0	308	0	0
T407	0	467	0	0
T408	0	312	0	0
T421	0	263	0	0
T422	0	316	0	0
T433	0	304	0	0
T434	0	332	0	0
T435	0	366	0	0
T436	0	344	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

DstReqKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	1674537	1450796	0	0
T1	479	306	0	0
T2	382	209	0	0
T3	342	168	0	0
T4	388	214	0	0
T5	410	236	0	0
T6	460	286	0	0
T7	431	259	0	0
T28	414	241	0	0
T109	396	224	0	0
T110	315	143	0	0

SrcAckBusyChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	273	0	0
T74	245191	1	0	0
T129	157712	0	0	0
T180	0	1	0	0
T407	0	1	0	0
T408	0	1	0	0
T421	0	1	0	0
T422	0	1	0	0
T433	0	1	0	0
T434	0	1	0	0
T435	0	1	0	0
T436	0	1	0	0
T437	11268	0	0	0
T438	17634	0	0	0
T439	45269	0	0	0
T440	17072	0	0	0
T441	127801	0	0	0
T442	23495	0	0	0
T443	46713	0	0	0
T444	19319	0	0	0

SrcBusyKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	143239795	0	0
T1	27617	27229	0	0
T2	19812	19316	0	0
T3	10964	10508	0	0
T4	25985	25138	0	0
T5	25239	24581	0	0
T6	35891	34928	0	0
T7	25464	24868	0	0
T28	24307	23793	0	0
T109	17085	16650	0	0
T110	17700	16837	0	0

Line Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_cause_cdc

	Line No.	Total	Covered	Percent
TOTAL		22	22	100.00
CONT_ASSIGN	65	1	1	100.00
ALWAYS	71	6	6	100.00
CONT_ASSIGN	85	1	1	100.00
CONT_ASSIGN	109	1	1	100.00
ALWAYS	115	9	9	100.00
CONT_ASSIGN	150	1	1	100.00
CONT_ASSIGN	155	1	1	100.00
CONT_ASSIGN	156	1	1	100.00
CONT_ASSIGN	200	1	1	100.00

64                      
65         1/1            assign src_req = src_we_i | src_re_i;
           Tests:       T6 T29 T77 
66                      
67                        // busy indication back-pressures upstream if the register is accessed
68                        // again.  The busy indication is also used as a "commit" indication for
69                        // resolving software and hardware write conflicts
70                        always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
71         1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
72         1/1                src_busy_q <= '0;
           Tests:       T1 T2 T3 
73         1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
74         1/1                src_busy_q <= 1'b1;
           Tests:       T6 T29 T77 
75         1/1              end else if (src_ack) begin
           Tests:       T1 T2 T3 
76         1/1                src_busy_q <= 1'b0;
           Tests:       T6 T29 T77 
77                          end
                        MISSING_ELSE
78                        end
79                      
80                        // A src_ack should only be sent if there was a src_req.
81                        // src_busy_q asserts whenever there is a src_req.  By association,
82                        // whenever src_ack is seen, then src_busy must be high.
83                        `ASSERT(SrcAckBusyChk_A, src_ack |-> src_busy_q, clk_src_i, !rst_src_ni)
84                      
85         1/1            assign src_busy_o = src_busy_q;
           Tests:       T6 T29 T77 
86                      
87                        // src_q acts as both the write holding register and the software read back
88                        // register.
89                        // When software performs a write, the write data is captured in src_q for
90                        // CDC purposes.  When not performing a write, the src_q reflects the most recent
91                        // hardware value. For registers with no hardware access, this is simply the
92                        // the value programmed by software (or in the case R1C, W1C etc) the value after
93                        // the operation. For registers with hardware access, this reflects a potentially
94                        // delayed version of the real value, as the software facing updates lag real
95                        // time updates.
96                        //
97                        // To resolve software and hardware conflicts, the process is as follows:
98                        // When software issues a write, this module asserts "busy".  While busy,
99                        // src_q does not take on destination value updates.  Since the
100                       // logic has committed to updating based on software command, there is an irreversible
101                       // window from which hardware writes are ignored.  Once the busy window completes,
102                       // the cdc portion then begins sampling once more.
103                       //
104                       // This is consistent with prim_subreg_arb where during software / hardware conflicts,
105                       // software is always prioritized.  The main difference is the conflict resolution window
106                       // is now larger instead of just one destination clock cycle.
107                     
108                       logic busy;
109        1/1            assign busy = src_busy_q & !src_ack;
           Tests:       T6 T29 T77 
110                     
111                       // This is the current destination value
112                       logic [DataWidth-1:0] dst_qs;
113                       logic src_update;
114                       always_ff @(posedge clk_src_i or negedge rst_src_ni) begin
115        1/1              if (!rst_src_ni) begin
           Tests:       T1 T2 T3 
116        1/1                src_q <= ResetVal;
           Tests:       T1 T2 T3 
117        1/1                txn_bits_q <= '0;
           Tests:       T1 T2 T3 
118        1/1              end else if (src_req) begin
           Tests:       T1 T2 T3 
119                           // See assertion below
120                           // At the beginning of a software initiated transaction, the following
121                           // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122                           // change for the duration of the synchronization operation.
123        1/1                src_q <= src_wd_i & BitMask;
           Tests:       T6 T29 T77 
124        1/1                txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
           Tests:       T6 T29 T77 
125        1/1              end else if (src_busy_q && src_ack || src_update && !busy) begin
           Tests:       T1 T2 T3 
126                           // sample data whenever a busy transaction finishes OR
127                           // when an update pulse is seen.
128                           // TODO: We should add a cover group to test different sync timings
129                           // between src_ack and src_update. ie. there can be 3 scenarios:
130                           // 1. update one cycle before ack
131                           // 2. ack one cycle before update
132                           // 3. update / ack on the same cycle
133                           // During all 3 cases the read data should be correct
134        1/1                src_q <= dst_qs;
           Tests:       T6 T25 T29 
135        1/1                txn_bits_q <= '0;
           Tests:       T6 T25 T29 
136                         end
                        MISSING_ELSE
137                       end
138                     
139                       // The current design (tlul_adapter_reg) does not spit out a request if the destination it chooses
140                       // (decoded from address) is busy. So this creates a situation in the current design where
141                       // src_req_i and busy can never be high at the same time.
142                       // While the code above could be coded directly to be expressed as `src_req & !busy`, which makes
143                       // the intent clearer, it ends up causing coverage holes from the tool's perspective since that
144                       // condition cannot be met.
145                       // Thus we add an assertion here to ensure the condition is always satisfied.
146                       `ASSERT(BusySrcReqChk_A, busy |-> !src_req, clk_src_i, !rst_src_ni)
147                     
148                       // reserved bits are not used
149                       logic unused_wd;
150        1/1            assign unused_wd = ^src_wd_i;
           Tests:       T1 T2 T3 
151                     
152                       // src_q is always updated in the clk_src domain.
153                       // when performing an update to the destination domain, it is guaranteed
154                       // to not change by protocol.
155        1/1            assign src_qs_o = src_q;
           Tests:       T6 T25 T29 
156        1/1            assign dst_wd_o = src_q;
           Tests:       T6 T25 T29 
157                     
158                       ////////////////////////////
159                       // CDC handling
160                       ////////////////////////////
161                     
162                       logic dst_req_from_src;
163                       logic dst_req;
164                     
165                     
166                       // the software transaction is pulse synced across the domain.
167                       // the prim_reg_cdc_arb module handles conflicts with ongoing hardware updates.
168                       prim_pulse_sync u_src_to_dst_req (
169                         .clk_src_i,
170                         .rst_src_ni,
171                         .clk_dst_i,
172                         .rst_dst_ni,
173                         .src_pulse_i(src_req),
174                         .dst_pulse_o(dst_req_from_src)
175                       );
176                     
177                       prim_reg_cdc_arb #(
178                         .DataWidth(DataWidth),
179                         .ResetVal(ResetVal),
180                         .DstWrReq(DstWrReq)
181                       ) u_arb (
182                         .clk_src_i,
183                         .rst_src_ni,
184                         .clk_dst_i,
185                         .rst_dst_ni,
186                         .src_ack_o(src_ack),
187                         .src_update_o(src_update),
188                         .dst_req_i(dst_req_from_src),
189                         .dst_req_o(dst_req),
190                         .dst_update_i,
191                         .dst_ds_i,
192                         .dst_qs_i,
193                         .dst_qs_o(dst_qs)
194                       );
195                     
196                     
197                       // Each is valid only when destination request pulse is high; this is important in not propagating
198                       // the internal assertion of 'dst_req' by the 'prim_pulse_sync' channel when just one domain is
199                       // reset.
200        1/1            assign {dst_we_o, dst_re_o, dst_regwen_o} = txn_bits_q & {TxnWidth{dst_req}};
           Tests:       T6 T29 T77 

---

Cond Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_cause_cdc

	Total	Covered	Percent
Conditions	14	12	85.71
Logical	14	12	85.71
Non-Logical	0	0
Event	0	0

 LINE       65
 EXPRESSION (src_we_i | src_re_i)
             ----1---   ----2---

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Unreachable
1	0	Covered	T6,T29,T77

 LINE       109
 EXPRESSION (src_busy_q & ((!src_ack)))
             -----1----   ------2-----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Covered	T6,T29,T77
1	1	Covered	T6,T29,T77

 LINE       125
 EXPRESSION ((src_busy_q && src_ack) || (src_update && ((!busy))))
             -----------1-----------    ------------2------------

-1-	-2-	Status	Tests
0	0	Covered	T1,T2,T3
0	1	Covered	T6,T25,T29
1	0	Covered	T6,T29,T77

 LINE       125
 SUB-EXPRESSION (src_busy_q && src_ack)
                 -----1----    ---2---

-1-	-2-	Status	Tests
0	1	Not Covered
1	0	Covered	T6,T29,T77
1	1	Covered	T6,T29,T77

 LINE       125
 SUB-EXPRESSION (src_update && ((!busy)))
                 -----1----    ----2----

-1-	-2-	Status	Tests
0	1	Covered	T1,T2,T3
1	0	Not Covered
1	1	Covered	T6,T25,T29

---

Branch Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_cause_cdc

	Line No.	Total	Covered	Percent
Branches		8	8	100.00
IF	71	4	4	100.00
IF	115	4	4	100.00

71             if (!rst_src_ni) begin
               -1-  
72               src_busy_q <= '0;
                 ==>
73             end else if (src_req) begin
                        -2-  
74               src_busy_q <= 1'b1;
                 ==>
75             end else if (src_ack) begin
                        -3-  
76               src_busy_q <= 1'b0;
                 ==>
77             end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T6,T29,T77
0	0	1	Covered	T6,T29,T77
0	0	0	Covered	T1,T2,T3

115            if (!rst_src_ni) begin
               -1-  
116              src_q <= ResetVal;
                 ==>
117              txn_bits_q <= '0;
118            end else if (src_req) begin
                        -2-  
119              // See assertion below
120              // At the beginning of a software initiated transaction, the following
121              // values are captured in the src_q/txn_bits_q flops to ensure they cannot
122              // change for the duration of the synchronization operation.
123              src_q <= src_wd_i & BitMask;
                 ==>
124              txn_bits_q <= {src_we_i, src_re_i, src_regwen_i};
125            end else if (src_busy_q && src_ack || src_update && !busy) begin
                        -3-  
126              // sample data whenever a busy transaction finishes OR
127              // when an update pulse is seen.
128              // TODO: We should add a cover group to test different sync timings
129              // between src_ack and src_update. ie. there can be 3 scenarios:
130              // 1. update one cycle before ack
131              // 2. ack one cycle before update
132              // 3. update / ack on the same cycle
133              // During all 3 cases the read data should be correct
134              src_q <= dst_qs;
                 ==>
135              txn_bits_q <= '0;
136            end
               MISSING_ELSE
               ==>

Branches:

-1-	-2-	-3-	Status	Tests
1	-	-	Covered	T1,T2,T3
0	1	-	Covered	T6,T29,T77
0	0	1	Covered	T6,T25,T29
0	0	0	Covered	T1,T2,T3

---

Assert Coverage for Instance : tb.dut.top_earlgrey.u_pinmux_aon.u_reg.u_wkup_cause_cdc

	Total	Attempted	Percent	Succeeded/Matched	Percent
Assertions	4	4	100.00	4	100.00
Cover properties	0	0		0
Cover sequences	0	0		0
Total	4	4	100.00	4	100.00

---

Assertion Details

Name	Attempts	Real Successes	Failures	Incomplete
BusySrcReqChk_A	144043060	164119	0	0
DstReqKnown_A	1674537	1450796	0	0
SrcAckBusyChk_A	144043060	349	0	0
SrcBusyKnown_A	144043060	143239795	0	0

BusySrcReqChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	164119	0	0
T6	35891	1168	0	0
T8	42967	0	0	0
T9	49053	0	0	0
T13	31255	0	0	0
T25	27362	0	0	0
T29	36284	1718	0	0
T32	54101	0	0	0
T35	20032	0	0	0
T46	54545	0	0	0
T73	53368	0	0	0
T74	0	299	0	0
T76	0	1832	0	0
T77	0	798	0	0
T78	0	1648	0	0
T79	0	820	0	0
T84	0	1037	0	0
T127	0	678	0	0
T129	0	1381	0	0

DstReqKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	1674537	1450796	0	0
T1	479	306	0	0
T2	382	209	0	0
T3	342	168	0	0
T4	388	214	0	0
T5	410	236	0	0
T6	460	286	0	0
T7	431	259	0	0
T28	414	241	0	0
T109	396	224	0	0
T110	315	143	0	0

SrcAckBusyChk_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	349	0	0
T6	35891	3	0	0
T8	42967	0	0	0
T9	49053	0	0	0
T13	31255	0	0	0
T25	27362	0	0	0
T29	36284	3	0	0
T32	54101	0	0	0
T35	20032	0	0	0
T46	54545	0	0	0
T73	53368	0	0	0
T74	0	1	0	0
T76	0	4	0	0
T77	0	2	0	0
T78	0	4	0	0
T79	0	2	0	0
T84	0	3	0	0
T127	0	2	0	0
T129	0	4	0	0

SrcBusyKnown_A

Name	Attempts	Real Successes	Failures	Incomplete
Total	144043060	143239795	0	0
T1	27617	27229	0	0
T2	19812	19316	0	0
T3	10964	10508	0	0
T4	25985	25138	0	0
T5	25239	24581	0	0
T6	35891	34928	0	0
T7	25464	24868	0	0
T28	24307	23793	0	0
T109	17085	16650	0	0
T110	17700	16837	0	0